Installing Abiquo Remote Services

This section will guide you through the required steps to install Abiquo
Enterprise Edition Remote Services server and all its dependencies using the Abiquo Installer ISO.

IMPORTANT To follow this document you will need to burn the Abiquo Platform installer ISO to a CD and boot your server from it.

1. Boot from the CD or ISO image

At the boot up screen, hit the <Enter> key.

2. Test the Media (optional)

If the Abiquo ISO image was burnt to a CD you have the option of testing the
media. This could take 15-20 minutes but is recommended to rule out media
defect.

3. Welcome Screen

After completing step 3, the graphical setup screen will appear. Click <Next>.

4. Select your keyboard

and click <Next>.

5. Partition the disk

The installer will search for any Abiquo installations and will allow you to partition
the disk. Selecting the default is ok.

If this is a new installation it is ok to remove all partitions:

8. Set up networking

Either use DHCP or manually configure the networking parameters.

a. DHCP

If using DHCP, just click <Next> to go to the next screen.
If you need to set up networking manually, then click the <Edit> button and
follow along:

b. Fixed IP address

Under "IP Address" enter the server IP address.

For "Prefix" enter its subnet mask (it could be in CIDR notation or dotted format.)

Disable IPv6 support and click <OK>.

Back at the networking screen, enter a hostname for the server:

Under "Miscellaneous Settings" enter the appropriate values and click
<Next>.

If you do not have this information please ask your System/Network
Administrator.

9. Select your location and click <Next>:

10. Enter your root password and click <Next>:

If you need remote assistance, your Abiquo support representative will need this
password.

11. Select the type of installation

To install the Remote Services, select "Abiquo V2V Conversion Services" and uncheck everything else.

Click <Next> to continue.

12. Ready to install

The final installation screen will appear. Click <Next> to continue

The installation process usually takes 5-10 minutes, depending on your hardware.
You will get the following screen at the end of the installation. Click the <Reboot>
button to continue

Log In to the web client

Now go to your favorite browser and type in the AEE site address for the server: http://MyServerName:8080/client-premium/. The default login and password are
"admin" and "xabiquo", respectively.

Register the software

Set up Heartbeating (optional)

Troubleshooting

Abiquo is compiling a troubleshooting document, which will be posted and circulated
when it is ready. For the time being, contact eesupport@abiquo.com for any
installation issues.