Abiquo 2.6


Skip to end of metadata
Go to start of metadata

Log in to the VMware Infrastructure Client

As shown in the following screenshot:

  1. Select your Host or Cluster (depending on your configuration)
  2. Click on the Configuration tab
  3. Click on Storage Adapters on the left
  4. Click Add if no adapter is present and add an iSCSI adapter

Choose the iSCSI Software Adapter

In the Details pane, click on Properties

If the adapter is not enabled, click "Configure", then click OK.

Enter a name and alias as required.
This will be your ESX(i) host IQN.
Tick the checkbox to enable the adapter.

Click OK to save.