Abiquo Documentation Cookies Policy

Our Documentation website uses cookies to improve your experience. Please visit our Cookie Policy page for more information about cookies and how we use them.


Abiquo 2.6


Skip to end of metadata
Go to start of metadata

This document contains basic information about Abiquo User Interface Messages.

The Abiquo User Interface uses the Abiquo API, so the messages produced by the User Interface are the same as those produced by the Abiquo API. The list of API error messages is included in the Response Errors section of the Developer's Guide and a version of this list is included here. Some of these messages can be produced by API functionality only, so they will never be seen in the GUI.

In Abiquo 2.6 GA, the error codes are:

400-BAD-REQUEST

Request not valid

401-UNAUTHORIZED

This request requires user authentication

403-FORBIDDEN

Access denied

404-NOT-FOUND

The requested resource does not exist

405-METHOD-NOT-ALLOWED

The resource does not expose this method

406-NOT-ACCEPTABLE

Invalid version parameter for 'Accept' header

409-CONFLICT

Conflict

409-CONFLICT-NotImpemented

Not Implemented

409-CONFLICT-StaleObject

Another request has updated this entity

412-PRECONDITION-FAILED

Error releasing resources on the hypervisor

412-PRECONDITION-FAILED-HEADER

Header 'X-abiquo-version' is mandatory

415-UNSUPPORTED-MEDIA-TYPE

The Abiquo API currently only supports application/XML Media Type

415-UNSUPPORTED-MEDIA-TYPE-VERSION

Invalid 'Content-type' version

500-INTERNAL-SERVER-ERROR

Unexpected exception

503-SERVICE-UNAVAILABLE

Service unavailable: try again in a few moments

503-SERVICE-UNAVAILABLE_PERSISTENT

Service unavailable: try again in a few moments

AAFFINITY-0

The anti-affinity layer requires more machines than currently available in the datacenter

AAFFINITY-1

The anti-affinity layer requires more machines than currently available in the rack

ALLOC-0

There are not enough resources to create the virtual machine

ALLOC-1

Cannot make the requested changes to the virtual machine because there are not enough free resources on the host machine. Please contact the Administrator

ALLOC-2

There are not enough VLAN tags available

AM-0

Failed appliance manager communication

AM-1

Timeout during appliance manager communication

AM-2

AM service unavailable; please check the URL of the service

AM-3

Failed appliance manager request. It is possible that the repositoryLocation property is not correct, NFS is not available or NFS privileges do not allow access to the server

BC-1

The requested backup template does not exist

BC-10

Disks can only be requested for complete or snapshot backup type

BC-12

Invalid time. Time format should be HH:mm:ss Z

BC-13

Invalid date. Date format should be yyyy/MM/dd HH:mm:ss Z

BC-14

Missing backup values

BC-15

Valid status values are: done, progress, failed

BC-16

Accepted values for hours backup are 0 to 24. E.g., every 5 hours

BC-17

Invalid values for disks. It should be a list of disks.

BC-18

Invalid values for paths. It should be a list of paths.

BC-2

A backup with the requested template already exists

BC-3

The requested backup datacenter does not exist

BC-4

The requested backup attribute does not exist

BC-5

Some backup type values are wrong. Check that all type values are correctly spelled and written in lower-case letters

BC-6

Some of the requested options are not enabled

BC-7

Some backup week days are wrong

BC-8

Some of the requested periods are wrong

BC-9

Paths can only be requested for filesystem backup type

BC11

Time value not supplied

CATEGORY-1

The requested category does not exist

CATEGORY-10

Cannot share the VM template because it is in a local category

CATEGORY-11

Cannot change the category to a local one if the VM template is shared

CATEGORY-12

Current user does not have enough privileges to modify a local category.

CATEGORY-2

A category with this name already exists.

CATEGORY-3

This category cannot be deleted

CATEGORY-4

Invalid category identifier in the category link

CATEGORY-5

Category name cannot be null

CATEGORY-6

Cannot move a local category to another enterprise.

CATEGORY-7

Current user does not have enough privileges to create a global category.

CATEGORY-8

Cannot change a global category to a local category.

CATEGORY-9

Current user does not have enough privileges to remove this category.

CHEF-0

Could not get the list of available recipes for the enterprise

CHEF-1

Could not get the list of available Chef roles for the enterprise

CHEF-10

The validator certificate supplied is not a valid private key. Please verify the key format

CHEF-11

The admin certificate supplied is not a valid private key. Please verify the key format

CHEF-12

The Chef server URL supplied is malformed

CHEF-13

The validator client supplied does not exist

CHEF-14

Could not connect to the Chef server to perform the request. Please check that the client has the appropriate permissions to perform the task

CHEF-2

An unexpected error occurred while connecting to the Chef server. Please contact the administrator.

CHEF-3

The node does not exist on the Chef Server. If the virtual machine is bootstrapping, please wait until the process completes.

CHEF-4

The given runlist element does not exist on the Chef Server

CHEF-5

The node could not be updated on the Chef Server. Please contact the Administrator.

CHEF-6

Could not connect to the Chef server. Please contact the Administrator

CHEF-7

Could not connect to the Chef server with the given Admin data. Please verify the credentials

CHEF-8

The enterprise is not configured to use Chef

CHEF-9

The virtual machine cannot use Chef. Please check that the template is Chef enabled and the Enterprise can use Chef

CONSTR-InstanceName

Missing instance name

CONSTR-LENGTH-NAME-MAX

The length of the NAME parameter must be less than 255 characters

CONSTR-LENGTH-NAME-MIN

The length of the NAME parameter must be greater than 1 characters

CONSTR-LENGTH-VOL-NAME-MAX

The length of the NAME parameter must be less than 255 characters

CONSTR-LENGTH-VOL-NAME-MIN

The length of the NAME parameter must be greater than 1 characters

CONSTR-SNAPSHOT-LENGTH-NAME-MAX

The length of the NAME parameter must be less than 255 characters

CONSTR-SNAPSHOT-LENGTH-NAME-MIN

The length of the NAME parameter must be greater than 1 characters

CONVERSION-0

Invalid DiskFormat for the conversion, allowed values : RAW, VMDK_STREAM_OPTIMIZED, VMDK_FLAT, VMDK_SPARSE, VHD_FLAT, VHD_SPARSE, VDI_FLAT, VDI_SPARSE, QCOW2_FLAT, QCOW2_SPARSE

CONVERSION-1

The requested conversion does not exist

CONVERSION-2

The requested conversion already exists for the given virtual machine template and disk format

CONVERSION-3

The requested conversion format is the same as the base format of the virtual machine template

CONVERSION-4

Could not restart the requested conversion because it had not failed

CONVERSION-5

Conversion state is QUEUED but it does not have an associated task; try deleting the conversion before retrying.

CONVERSION-6

Failed to send conversion of template.

CONVERSION-7

Cannot request a conversion of a virtual machine template with UNKNOWN or INCOMPATIBLE disk format.

COSTCODE-0

The requested cost code does not exist

COSTCODE-1

Missing cost code parameter

COSTCODE-2

Duplicate name for cost code

COSTCODE-3

Cost code name is required

COSTCODE-4

Cost code description is required

COSTCODE-5

Cost code name: maximum length is 20 characters

COSTCODE-6

Cost code description: maximum length is 100 characters

COSTCODE-7

Cost code cannot be deleted because it is assigned to one or more virtual machine templates

COSTCODE_CURRENCY-0

Duplicate value by cost code and currency

COSTCODE_CURRENCY-1

The requested cost code -currency does not exist

COSTCODE_CURRENCY-2

The cost code -currency is not assigned to the cost code

COSTCODE_CURRENCY-3

Price is required

CURRENCY-0

The requested currency does not exist

CURRENCY-1

At least one currency is required

CURRENCY-2

Duplicate name for currency

CURRENCY-3

Cannot remove currency associated with a pricing model

CURRENCY-4

Currency name is required

CURRENCY-5

Currency symbol is required

CURRENCY-6

Currency name: maximum length is 20 characters

CURRENCY-7

Currency symbol: maximum length is 10 characters

CURRENCY-8

Currency digit: maximum value is 9

DATACENTER-REPOSITORY-NOT-CREATED

Datacenter repository not configured; check the appliance manager of the datacenter. Contact your Infrastructure Administrator

DATASTORE-0

The requested datastore does not exist

DATASTORE-4

Duplicate name for the datastore

DATASTORE-5

Duplicate root path for the datastore

DATASTORE-6

Duplicate directory path for the datastore

DATASTORE-7

The datastore is not assigned to that machine

DC-0

The requested datacenter does not exist

DC-10

There are not enough resources available in the datacenter. Try again in a few minutes and if the error persists, please contact your System Administrator.

DC-3

There is already a datacenter with that name

DC-4

The current enterprise cannot use this datacenter

DC-5

Cannot delete datacenter with storage devices associated

DC-6

Cannot delete datacenter with virtual datacenters associated

DC-7

Datacenter queues are not configured (check the BPM and virtual factory remote services)

DC-8

Missing datacenter link

DC-9

Invalid datacenter link

DEVICE-0

The requested device does not exist

DEVICE-1

Duplicate storage device

DHCP_OPTION-0

The requested DHCP option does not exist

DHCP_OPTION-12

Missing DHCP option parameter

DVD-1

The requested DVD does not exist

DVD-2

Virtual machine template link with rel 'image' is mandatory

ED-1

Cannot attach more than 4 disks to IDE controller

EDIT-01

This method requires the virtual machine to be deployed on a target hypervisor

EN-0

The requested enterprise does not exist

ENPROP-0

The requested enterprise properties do not exist

ENTERPRISE-10

The enterprise does not have permission to use the requested datacenter

ENTERPRISE-11

Invalid enterprise identifier in the enterprise link

ENTERPRISE-12

Missing link to the pricing template

ENTERPRISE-13

Missing pricing template parameter

ENTERPRISE-14

You do not have enough privileges to configure the Chef properties

ENTERPRISE-15

You do not have enough privileges to set the enterprise theme

ENTERPRISE-4

Duplicate name for an enterprise

ENTERPRISE-5

Cannot delete enterprise with virtual datacenters associated

ENTERPRISE-6

Cannot delete the current user's enterprise

ENTERPRISE-7

Enterprise name cannot be empty

ENTERPRISE-8

Missing enterprise link

ENTERPRISE-9

Cannot delete enterprise because some users have roles that cannot be deleted, please change their enterprise before continuing

EVENT-0

This event does not exist

GEN-0

Malformed URI

GEN-1

Identifier cannot be 0

GEN-10

Identifier is required

GEN-11

The identifier field cannot be used to create entities

GEN-12

Invalid private network type

GEN-13

Unexpected error

GEN-14

The operation could not be performed. Please contact your System Administrator

GEN-15

Not enough privileges to perform this operation

GEN-16

The ID parameter is different from the entity ID

GEN-17

The plugin type was not found

GEN-18

The requested operation is unsupported by the hypervisor plugin

GEN-19

The supplied connection is not valid for the hypervisor plugin

GEN-2

Invalid XML document; please ensure all mandatory fields are correct

GEN-20

The requested virtual machine definition can not be applied by the hypervisor plugin

GEN-3

Invalid XML document

GEN-4

Not enough permissions to perform this action

GEN-5

Invalid credentials

GEN-6

Invalid link reference

GEN-7

The property 'name' must not have whitespace at the beginning or the end

GEN-8

The property 'symbol' must not have whitespace at the beginning or the end

GEN-9

The property 'description' must not have whitespace at the beginning or the end

HD-1

The requested hard disk does not exist

HD-10

Invalid hard disk attachment sequence number

HD-11

Cannot perform this action because the hard disk is not attached to a virtual machine

HD-12

The hard disk cannot be edited because it is being used by a virtual machine

HD-2

Disk 0 is the system disk and cannot be deleted from the virtual machine

HD-3

Invalid disk size.

HD-4

Cannot perform this action because the hard disk is currently attached to a virtual machine

HD-5

Invalid link to the hard disk to attach

HD-6

Invalid virtual datacenter in the link to the volume to attach

HD-7

Cannot perform this action because hard disk creation is not available for this hypervisor

HD-8

The size of the hard disk cannot be reduced

HD-9

Cannot perform this action because hard disk resize is not available for this hypervisor

HYP-01

Unable to connect; invalid hypervisor location (IP or port)

HYPERVISOR-1

Invalid hypervisor IP. A hypervisor with that IP already exists

HYPERVISOR-2

Invalid hypervisor service IP. A hypervisor with that service IP already exists

HYPERVISOR-3

The Hypervisor type of the target Hypervisor is not set

HYPERVISOR_TYPE-0

The requested hypervisor type is invalid

ICON-1

Duplicate path for an icon

ICON-2

The requested icon does not exist

ICON-3

No icon found with the requested path

ICON-4

Cannot delete the icon because it is in use by a virtual machine template

ICON-5

Invalid Icon identifier in the Icon link

LAYER-0

The layer already exists. To add virtual machines to an existing layer, use virtual machine reconfigure

LAYER-1

Cannot create a new layer by reconfiguring the virtual machine. Use the define layer feature

LAYER-2

Layer creation requires exactly two virtualmachine links

LAYER-3

Cannot create layer because one or more of the virtual machines is already associated with a layer

LAYER-4

Cannot delete layer because it is associated with more than one virtual machine

LAYER-5

Malformed layer link

LAYER-6

Cannot move a deployed virtual machine from one layer to another

LAYER-7

Cannot remove association between a layer and one virtual machine. Use the delete layer feature

LAYER-8

Cannot associate the virtual machine with this layer because the virtual machine is already allocated to a hypervisor that is incompatible with the layer

LICENSE-0

The requested license does not exist

LICENSE-1

The license provided is not valid

LICENSE-2

Could not initialize licensing ciphers

LICENSE-3

Could not read licensing cipher key

LICENSE-4

The maximum number of managed cores has been reached

LICENSE-5

The license is already being used

LIMIT-0

The required resources exceed the allowed limits

LIMIT-1

The required resources exceed the allowed limits

LIMIT-10

Cannot edit resource limits; current enterprise and datacenter allocation exceeds the new specified limits (see SYSTEM traces in order to determine which resources are at HARD limit)

LIMIT-11

Cannot unassign datacenter from enterprise because it is being used by virtual datacenter(s).

LIMIT-12

Cannot unassign datacenter from enterprise because it has a network belonging to this enterprise

LIMIT-13

Cannot edit resource limits; current enterprise allocation exceeds the new specified limits

LIMIT-14

Cannot edit resource limits; current datacenter allocation exceeds the new specified limits

LIMIT-15

Invalid link of the tier to allow

LIMIT-16

Datacenter identifier from tier link does not match the identifier from datacenter link

LIMIT-17

Cannot restrict the tier because the enterprise has already created volumes in it

LIMIT-18

Not enough permissions to create the limit in this datacenter

LIMIT-19

Not enough permissions to allow new tiers in this datacenter

LIMIT-2

The required resources exceed the soft limits

LIMIT-6

Invalid VLAN hard limit; this cannot be greater than the number of VLANS per virtual datacenter: VLANs_per_VDC

LIMIT-7

Duplicate limits by enterprise and datacenter

LIMIT-8

Limits by enterprise and datacenter do not exist

LIMIT-9

Cannot edit resource limits; current enterprise allocation exceeds the new specified limits (see SYSTEM traces in order to determine which resources are at HARD limit)

LNK-0

Invalid link. Check documentation

LNK-1

Invalid number of links: this resource only accepts a single link

LNK-2

Virtual machine template link with rel 'virtualmachinetemplate' is mandatory

LNK-3

Virtual machine template link is invalid

MACHINE-0

The requested machine does not exist

MACHINE-1

The machine is not assigned to the datacenter or rack

MACHINE-10

The IQN of the target physical machine is not set

MACHINE-11

The machine is in a managed rack and its name cannot be changed.

MACHINE-12

The requested machine cannot be reserved because another enterprise has already reserved it.

MACHINE-13

The requested machine cannot be released because it is not reserved

MACHINE-14

The requested machine is already reserved.

MACHINE-15

There are no virtual machines on the physical machine

MACHINE-16

The requested machine cannot be reserved because it contains virtual machines deployed by another enterprise.

MACHINE-17

The state of the physical machine does not allow retrieval of virtual machines

MACHINE-18

Invalid link to network service type

MACHINE-19

Duplicate network service type for network interfaces

MACHINE-2

Machine definition should have at least one datastore created and enabled

MACHINE-20

Cannot update machine: network service type of network interface cannot be changed when it is in use

MACHINE-21

At least one network interface must have a network service type assigned

MACHINE-22

Cannot update machine '%s (%s)': cannot change network service type of network interface '%s' when it is in use

MACHINE-23

The network service types assigned to the host NICs and the target virtual datacenter are different

MACHINE-24

The state of the physical machine does not allow capture of virtual machines

MACHINE-25

Duplicate network interface name

MACHINE-26

Invalid entity: 'virtualSwitch' element not found

MACHINE-27

The requested plugin does not provide any host discovery method

MACHINE-28

There are virtual machines currently not synchronized and it is impossible to recover their current vNICs

MACHINE-29

Machines in the same datacenter must have a unique name

MACHINE-3

A machine cannot be added to a UCS Rack in this way

MACHINE-4

Invalid virtual switch name

MACHINE-5

The requested state change is not valid

MACHINE-6

The requested machine could not be contacted

MACHINE-7

Machine cannot be removed because it is blocked by the high availability engine. Manually re-enable to return it to managed state then try again.

MACHINE-8

Invalid IPMI configuration

MACHINE-9

Invalid IP range

MAIL-0

No recipient has been selected, please indicate owner and/or enterprise admin

MAIL-1

Sender does not have email address set

MAIL-2

No recipient has been found

MAIL-3

Bad Internet address error

MAIL-4

Bad JNDI Error

MAIL-5

Message body text is required

NC-0

The requested IP does not exist

NC-1

Missing IP query parameter

NC-10

The IP format is invalid

NC-11

Access is denied, please check whether the domain-username-password are correct. Also, if not already done please check the GETTING STARTED and FAQ sections in readme.htm. They provide information on how to correctly configure the Windows machine for DCOM access, so as to avoid such exceptions.

NC-2

Bad credentials attempting to retrieve the list of physical machines from rack

NC-3

Bad credentials attempting to retrieve the machine

NC-4

There is a machine running at the given IP but no hypervisor is responding

NC-5

There is no machine running at the given IP

NC-6

Unexpected exception building the request to discovery manager

NC-7

The discovery manager is currently not available

NC-8

The requested virtual machine was not found on the remote hypervisor

NC-9

The requested host is not managed

NET-0

Invalid network configuration for the virtual datacenter

NET-10

Parameter IPFrom is invalid

NET-11

Parameter IPTo is invalid

NET-12

Invalid link for configuring the virtual machine network

NET-13

Invalid virtual datacenter identifier in the configuration link

NET-14

Invalid virtual appliance identifier in the configuration link

NET-15

Invalid virtual machine identifier in the configuration link

NET-16

Invalid configuration identifier in the configuration link. Configuration ID does not belong to any VLAN configuration used by this virtual machine

NET-17

Nonexistent network configuration

NET-8

This network has no IP addresses

NET-9

Parameter IPFrom is greater than IPTo

NODECOLLECTOR-1

Nodecollector has raised an error

NST-0

The name of the network service type must be supplied

NST-1

The name of the network service type already exists

NST-10

Invalid datacenter identifier in the network service type link

NST-11

Invalid network service type for '%s'. This distributed network interface must have an associated network service type. Conflict with machine '%s (%s)'

NST-12

Conflict error trying to assign network service '%s' to network interface '%s'. Conflict with machine '%s (%s)'

NST-2

The requested network service type does not exist

NST-3

You can edit the current default network service type for a datacenter, but you cannot delete it

NST-4

A datacenter needs at least one network service type and there is only one left

NST-5

Invalid network service type identifier in the enterprise link

NST-6

Missing network service type link

NST-7

Cannot change network service type because there are some virtual machines using IPs in this VLAN

NST-8

Network service type cannot be deleted because it is assigned to physical machine(s)

NST-9

Network service type cannot be deleted because it is assigned to VLAN(s)

NVISC-0

The requested virtual machine node for the persistent conversion does not exist

OVF-PACKAGE-0

The requested OVF package does not exist

OVF-PACKAGE-1

The requested OVF package list does not exist

OVF-PACKAGE-2

Cannot return the template definition

OVF-PACKAGE-3

Cannot find the RepositorySpace

OVF-PACKAGE-4

The requested RepositorySpace does not exist

OVF-PACKAGE-5

The URL of the disk format type is invalid

OVF-PACKAGE-6

The OVF URL in the template definition is invalid

OVF-PACKAGE-LIST-0

OVF Package list name already exists

OVF-PACKAGE-LIST-1

The template definition list is not associated with a URL (ovfindex.xml), so it cannot be refreshed from the source

OVF-PACKAGE-LIST-2

OVF Package list name is required

PERSISTENT-1

The virtual machine template is already persistent

PERSISTENT-10

Invalid volume link

PERSISTENT-11

Invalid virtual datacenter link

PERSISTENT-12

No virtual datacenter found for the persistent virtual machine

PERSISTENT-13

Unable to create the initiator mapping for the volume.

PERSISTENT-14

The virtual datacenter does not belong to the correct enterprise

PERSISTENT-2

A RAW format conversion does not exist for the virtual machine template but is required to make it persistent

PERSISTENT-3

No name given for the new persistent template

PERSISTENT-4

No tier or volume for storing the persistent virtual machine template was found in the request but one of these is required

PERSISTENT-5

There are no pools available in at least one of the selected tiers

PERSISTENT-6

An error ocurred while creating the volume. Please contact your administrator

PERSISTENT-7

Another virtual machine is already using the persistent virtual machine template.

PERSISTENT-8

No virtual machine template found to persist

PERSISTENT-9

Invalid tier link

PRICING_COSTCODE-0

Duplicate value by cost code and pricing template

PRICING_COSTCODE-1

The requested cost code -pricing template does not exist

PRICING_TIER-0

Duplicate value by tier and pricing template

PRICING_TIER-1

The requested tier -pricing template does not exist

PRICING_TIER-2

The pricing tier is not related to the pricing model indicated

PRICING_TIER-3

This tier is not related to the datacenter indicated

PRICING_TIER-4

Price is required

PRICING_TIER_5

The tier indicated by the link is not related to this pricing tier

PRICINGTEMPLATE-0

Missing currency parameter

PRICINGTEMPLATE-1

Missing enterprise parameter

PRICINGTEMPLATE-10

Minimum charge values should be between 0 and 6

PRICINGTEMPLATE-2

Duplicate name for pricing template

PRICINGTEMPLATE-3

The requested pricing template does not exist

PRICINGTEMPLATE-4

Cannot delete a pricing template with enterprise associated

PRICINGTEMPLATE-5

The smallest charging period is DAY

PRICINGTEMPLATE-6

Pricing template name cannot be empty

PRICINGTEMPLATE-7

Missing link to the currency

PRICINGTEMPLATE-8

Charging period values should be between 2 and 6

PRICINGTEMPLATE-9

Check minimum charge value is not null or wrong type

PRIVILEGE-0

The requested privilege does not exist

PROFILE-0

Duplicate name for hardware profile

PROFILE-1

The requested hardware profile does not exist

PROFILE-2

Cannot create the hardware profile because the requested datacenter is a public datacenter

PROFILE-3

Invalid link to the hardware profile to get profile values

PROFILE-4

Invalid format of identifier to the hardware profile link to get profile values

PUBLIC-0

The key pair already exists

PUBLIC-1

The requested credentials do not exist

PUBLIC-10

The requested operation is not supported in a public datacenter.

PUBLIC-11

There are no credentials attached for use by the requested enterprise.

PUBLIC-12

The number of elastic ips per virtual machine is limited to one.

PUBLIC-2

The requested datacenter is not a public datacenter

PUBLIC-3

Unable to establish connection to the endpoint of public datacenter

PUBLIC-4

Unable to release the public IP

PUBLIC-5

The endpoint with the supplied access key is already in use

PUBLIC-6

The requested public datacenter already has credentials assigned.

PUBLIC-7

The request for remote access credentials is currently not supported.

PUBLIC-8

The credentials supplied for the public datacenter are not valid

PUBLIC-9

The requested provider is not supported.

QUERY-0

Invalid 'by' parameter

QUERY-1

Invalid 'type' parameter. Only 'EXTERNAL', 'UNMANAGED' or 'PUBLIC' allowed

QUERY-2

Invalid range: 'startwith' parameter must be less than 'limit' parameter

RABBITMQ-0

Failed connection to RabbitMQ

RACK-0

The rack is not assigned to the datacenter

RACK-10

This UCS Rack has no default Service Profile Template. You must either select one from the list or add a default Service Profile Template

RACK-11

This rack contains deployed virtual machines

RACK-12

The new VLAN tag range is not valid because some VLAN tags on the rack are outside of the new range

RACK-3

There is already a rack with that name in this datacenter

RACK-4

This rack does not exist

RACK-5

Machines in this rack cannot be discovered

RACK-6

This rack is not a UCS Rack

RACK-7

There is already a managed rack with this IP defined in the same datacenter

RACK-8

There is a problem with the details of the UCS Rack

RACK-9

Cannot remove this rack because there are some virtual machines deployed on it

REDIS-0

Failed connection to Redis

ROLE-0

The requested role does not exist

ROLE-1

The requested role cannot be modified

ROLE-10

Cannot modify the enterprise of this role because it is currently assigned to users of that enterprise.

ROLE-2

Missing privilege parameter

ROLE-3

The requested role is blocked. It cannot be deleted

ROLE-4

Cannot delete a role with a user associated

ROLE-5

Cannot delete a role with a RoleLdap associated

ROLE-6

Cannot create a role with the same name as an existing role for the same enterprise or with the same name as an existing global role

ROLE-7

Cannot create a global role with the same name as an existing role

ROLE-8

Not enough privileges to manage this role

ROLE-9

Property name must not be blank

ROLELDAP-0

The requested roleLdap does not exist

ROLELDAP-1

There are multiple entries for the requested roleLdap

ROLELDAP-2

The roleLdap must have a role

RS-0

The remote service is not assigned to the datacenter

RS-1

Wrong remote service type

RS-10

Cannot delete a DHCP Service. There are virtual machines deployed.

RS-11

The URL supplied is invalid

RS-12

The URI of the DHCP remote service is invalid

RS-13

The remote service does not have the abiquo.datacenter.id property set

RS-14

The remote service is configured with a different datacenter UUID, please adjust the abiquo.datacenter.id property in the remote service.

RS-15

A port must be defined in the URI

RS-16

The remote service indicated cannot be used in a remote service client pool

RS-17

An unexpected error occurred while getting the remote service client from the client pool

RS-18

Remote service exception: the remote service log contains more details

RS-19

Cannot delete a virtual system monitor service. There are virtual machines deployed.

RS-2

The remote service does not exist

RS-20

The URI parameter is required

RS-21

Datacenter UUID already used

RS-3

The remote service URL already exists and cannot be duplicated

RS-4

Malformed remote service URL

RS-5

This datacenter already has a storage pool assigned

RS-6

This datacenter already has a remote service of that type

RS-7

Failed connection to the remote service

RS-8

This remote service is not available to be checked

RS-9

Cannot delete a storage manager with storage pools associated

RS-AM-0

The repository exported by the current appliance manager is being used in another datacenter

RS-AM-1

The current repository holds virtual machine templates being used in some virtual appliances, so it is not possible to remove this remote service. You can replace the appliance manager with another one but only if the same repository is used.

RULE-1

The requested restrict shared server rule does not exist

RULE-2

The requested load balance rule does not exist

RULE-3

The requested load level rule does not exist

RULE-4

At least one load balance rule is required

RULE-5

Expected one link with the rel attribute; possible values (datacenter/rack/machine)

RULE-6

The load balance type indicated is null or invalid

RULE-7

Cannot add more than one allocation rule for a set of infrastructure elements, i.e. datacenter and/or rack and/or server. Please check and remove rules with duplicate elements.

SCOPE-0

Duplicate name for scope

SCOPE-1

The requested scope does not exist

SCOPE-2

Cannot delete the default scope

SCOPE-3

Cannot modify the default scope

SCOPE-4

The role supplied in user creation does not have this enterprise visible in its scope

SCOPE-5

Cannot remove the scope because there are roles associated with it

SCOPE-6

Cannot associate role with requested scope, because there are users with enterprises not included in this scope.

SCOPE-7

Scope invalid link

SCOPE-8

Cannot modify the scope because the enterprise to be removed from scope is the enterprise of a user with this scope assigned

SP-1

Missing IQN query parameter

SP-10

Missing storage pool parameter

SP-11

The datacenter parameter was not found in the storage pool link

SP-12

The storage device parameter was not found in the storage pool link

SP-13

Missing storage pool link

SP-14

Tier is restricted for your enterprise

SP-15

The storage pool can not be added because it points to the repository of the Appliance Manager

SP-2

The ID of the storage pool and the ID of the object supplied must be the same

SP-3

The requested storage pool does not exist

SP-4

There was an unexpected error while modifying the storage pool

SP-5

Could not get the storage pools from the target device

SP-6

Could not get the requested storage pool from the target device

SP-7

Cannot edit or delete the storage pool because it contains volumes

SP-8

Duplicate storage pool

SP-9

Tier is disabled

SSM-1

Could not get the storage pools on the target storage device

SSM-2

Could not get the given storage pool on the target storage device

SSM-3

Could not get the volumes in the given storage pool

SSM-4

Could not get the given volume in the given storage pool

SSM-5

Could not create the volume on the target storage device

SSM-6

Could not delete the volume from the target storage device

SSM-7

Could not update the volume on the target storage device

SSM-8

Could not add the given iSCSI initiator on the target storage device

SSM-9

Could not remove the given iSCSI initiator from the target storage device

STATS-0

No statistical data found

STATS-1

No statistical data found for the requested datacenter

STATS-2

No statistical data found for the requested enterprise in this datacenter

STATS-3

No statistical data found for the requested enterprise

SYSPROP-0

The requested system property does not exist

SYSPROP-1

There is already a system property with that name

TASK-1

The requested task does not exist

TASK-2

The state is not in the appropiate state

TIER-0

The requested storage tier does not exist

TIER-1

Embedded tier of the StoragePool cannot be null

Tier-10

The provided storage allocation policy is not a valid type

TIER-2

Missing link to the storage tier

TIER-3

Missing storage tier parameter

TIER-4

Datacenter parameter in storage tier link not found

TIER-5

The storage tier is not in the datacenter where you are trying to create the StoragePool

TIER-6

Cannot disable a tier with associated storage pools

TIER-7

The requested storage tier is disabled

TIER-8

VirtualDatacenter parameter was not found in storage tier link

TIER-9

The virtual datacenter link of the storage tier does not match the virtual datacenter supplied

USER 10

Cannot change the user nick (username)

USER 11

The user password is required

USER 12

The user name is required

USER 13

The user nick (username) is required

USER 14

Your enterprise does not allow you to manage this virtual datacenter

USER 9

The user cannot delete his own user account

USER-0

The user is not assigned to the enterprise

USER-1

Missing link to the role

USER-15

The supplied session does not exist

USER-16

The role of the user is locked. Only users with the same role can delete users with locked roles

USER-17

Cannot move user with local role to another enterprise

USER-18

Cannot assign role to user because the user's enterprise is not visible in the role's scope

USER-19

Cannot assign role to user because the role's scope is greater than the current user's scope.

USER-2

Missing roles parameter

USER-20

User must have a role from his enterprise or a global role

USER-21

The field surname is required

USER-22

The role of the user is locked. Only users with the same role can modify users with locked roles

USER-3

The requested user does not exist

USER-4

Duplicate username for user

USER-5

The email is not valid

USER-6

In LDAP mode cannot create user

USER-7

In LDAP mode cannot modify user's role

USER-8

In LDAP mode cannot modify user's enterprise

VAPP-0

The requested virtual appliance does not exist

VAPP-1

The virtual appliance is not deployed

VAPP-10

The virtual appliance cannot be moved or copied because it contains virtual machine templates that are not compatible with the target hypervisor

VAPP-11

The virtual appliance cannot be copied because it contains persistent virtual machine templates

VAPP-12

The virtual appliance does not contain any virtual machines

VAPP-13

The virtual appliance cannot be copied in this state. It should be NOT_DEPLOYED

VAPP-14

The virtual appliance move DTO does not contain the ''original'' link

VAPP-15

The virtual appliance move DTO does not contain the ''source'' link

VAPP-16

There are no virtual machines in the specified layer

VAPP-17

The length of the layer property must be between 0 and 255 characters

VAPP-18

The virtual appliance cannot be moved or copied because the target virtual datacenter is not in the same enterprise

VAPP-19

The virtual appliance cannot be created because of validation errors

VAPP-2

The virtual appliance is not running

VAPP-20

Error undeploying virtual appliance

VAPP-3

The virtual appliance is deployed

VAPP-5

The virtual appliance cannot be deleted in this state. It should be NOT_DEPLOYED or UNKNOWN

VAPP-6

The virtual appliance cannot be moved because it has no link to its virtual datacenter

VAPP-7

The virtual appliance cannot be moved or copied because the target virtual datacenter is not in the same datacenter

VAPP-8

The virtual appliance cannot be moved in this state. It should be NOT_DEPLOYED

VAPP-9

The virtual appliance cannot be moved or copied because it contains captured virtual machines

VASC-0

The requested persistent conversion does not exist

VASC-1

Invalid expected state

VDC-0

The requested virtual datacenter does not exist

VDC-1

Invalid hypervisor type for this virtual datacenter

VDC-2

This virtual datacenter contains virtual appliances and cannot be deleted without removing them first

VDC-3

This virtual datacenter has volumes attached and cannot be deleted without removing them first

VDC-4

This virtual datacenter has networks without IP addresses

VDC-5

Cannot edit resource limits; current virtual datacenter allocation exceeds the new specified limits (see SYSTEM traces in order to determine which resources are at HARD limit)

VDC-6

Virtual datacenter must be created with a private network

VDC-7

Virtual datacenter must have at least one private VLAN

VDC-8

Cannot edit resource limits; current virtual datacenter allocation exceeds the new specified limits

VERSION-1

Invalid version format

VERSION-2

No logo exists for the requested version

VIMAGE-0

The requested virtual machine template does not exist

VIMAGE-1

The virtual machine template supplied is not an instance

VIMAGE-10

The virtual machine template is being used by virtual machines and cannot be deleted

VIMAGE-11

The virtual machine template is being used by virtual machines in other enterprises and cannot be modified to not shared

VIMAGE-12

Malformed icon URL

VIMAGE-13

The virtual machine template is not a persistent template

VIMAGE-14

Cannot modify a failed persistent virtual machine template

VIMAGE-15

Cannot modify a persistent virtual machine template that is in progress

VIMAGE-16

No template definition link found

VIMAGE-17

Invalid template definition link

VIMAGE-18

The requested template is already present for the current enterprise in the datacenter provided.

VIMAGE-19

A persistent virtual machine template that is in progress cannot be deleted

VIMAGE-2

Invalid virtual machine template identifier in the virtual machine template link

VIMAGE-20

The disk type of a persistent virtual machine template cannot be modified

VIMAGE-21

A persistent virtual machine template cannot be shared

VIMAGE-22

The path of a persistent virtual machine template cannot be modified

VIMAGE-23

The HD required of a persistent virtual machine template cannot be modified. Use the primary disk resize

VIMAGE-24

The disk file size of a persistent virtual machine template cannot be modified

VIMAGE-25

Missing virtual machine template link

VIMAGE-26

Invalid virtual machine template link

VIMAGE-27

The virtual machine template creation request must include a template definition link OR a virtual machine template link of an instance.

VIMAGE-28

Cannot promote a virtual machine template instance with QUEUED conversions; please wait for them to finish then try again.

VIMAGE-29

The virtual machine template belongs to another enterprise and is not a shared template.

VIMAGE-3

Invalid datacenter repository identifier in the datacenter repository link

VIMAGE-30

Cannot delete virtual machine template because conversions are in progress.

VIMAGE-31

Cannot delete instance of virtual machine template because a conversion of this instance is still in progress.

VIMAGE-33

Cannot delete the disk file of a persistent virtual machine template

VIMAGE-34

Current virtual machine template is not being used by any deployed virtual machines and it has no instances. Use template delete

VIMAGE-35

Virtual machine template disk file is not found or currently unavailable in the repository filesystem.

VIMAGE-36

Cannot process a virtual machine template creation event from datacenter repository refresh check.

VIMAGE-37

Current virtual machine template already unavailable

VIMAGE-4

Cannot change the enterprise of the virtual machine template

VIMAGE-5

Cannot change the datacenter repository of a virtual machine template

VIMAGE-6

Cannot change the master template of a virtual machine template

VIMAGE-7

The requested virtual machine template is a master template; master templates cannot be deleted

VIMAGE-9

Cannot delete the requested shared virtual machine template because it belongs to another enterprise

VIMAGE-AM-DOWN

Check appliance manager configuration error

VIMAGE-INVALID-OVF-ALLOCATION-INITS

Virtual machine template cannot be added due to invalid allocation units

VIMAGE-REPOSITORY-CHANGED

Datacenter repository location has changed

VIMAGE-SYNCH-DATACENTER-REPOSITORY

Cannot obtain downloaded templates in the datacenter repository

VLAN-0

You have reached the maximum VLANs that you can create in this virtual datacenter

VLAN-1

Cannot create two VLANs with the same name in a virtual datacenter

VLAN-10

Attributes 'address', 'mask' and 'tag' cannot be changed when editing a private VLAN.

VLAN-11

The VLAN cannot be deleted because it is the default VLAN of this enterprise

VLAN-12

Cannot delete a VLAN with IPs used by virtual machines

VLAN-13

Field 'tag' is mandatory when you create public VLANs

VLAN-14

Cannot delete a VLAN with IPs purchased by enterprises

VLAN-15

Cannot create two VLANs with the same name in a datacenter

VLAN-16

VLAN tag out of limits

VLAN-17

The requested IP object does not exist

VLAN-18

Only 'quarantine' and 'available' attributes can be modified when editing an IP

VLAN-19

Attributes 'address' and 'mask' cannot be changed when editing a public, external or unmanaged network

VLAN-2

Cannot use any address outside the private range

VLAN-20

The IP does not exist or is not available

VLAN-21

The IP does not exist or is not purchased

VLAN-22

This IP address is currently used by a virtual machine. It cannot be released

VLAN-23

Invalid link to private IP address to create NIC

VLAN-24

Invalid virtual datacenter identifier in the IP link

VLAN-25

The IP address is already used by another virtual machine

VLAN-26

Invalid link to public IP address to create NIC

VLAN-27

Cannot release this IP from the virtual machine because the configured default gateway is in the same subnet. Please choose a different gateway before removing this IP

VLAN-28

The NIC does not exist

VLAN-29

Every virtual machine should have at least one NIC

VLAN-3

For performance reasons, the platform does not allow you to create large networks

VLAN-30

Invalid link to reorder NICs on a virtual machine

VLAN-31

Invalid link values (virtual datacenter, virtual appliance and/or virtual machine identifiers) for reordering NICs on a virtual machine

VLAN-32

Cannot set the IP as 'not available' while it is purchased by an enterprise

VLAN-33

Cannot release a public IP while it is assigned to a virtual machine

VLAN-34

The configuration does not exist

VLAN-35

Cannot assign the external VLAN as default because it is not assigned to any enterprise

VLAN-36

Unable to find default VLAN in virtual datacenter. Inconsistent state in database

VLAN-37

Invalid enterprise identifier in the enterprise link

VLAN-38

The IP address is already assigned to a virtual datacenter

VLAN-39

Cannot delete a VLAN with IPs assigned to a virtual datacenter

VLAN-4

This network can have a netmask of between 30 and 24. Use a value above 24

VLAN-40

The requested external VLAN does not belong to the same datacenter as the virtual datacenter

VLAN-41

IP format is invalid

VLAN-42

The IP does not exist

VLAN-43

This is the default VLAN for the virtual datacenter and it cannot be deleted

VLAN-44

The external VLAN belongs to another enterprise

VLAN-45

The IP address is not available to be used by a virtual machine

VLAN-46

The requested IP object does not exist

VLAN-47

Cannot change enterprise because this network is used as the default by a virtual datacenter

VLAN-48

The virtual network is not unmanaged

VLAN-49

Cannot delete unmanaged networks associated with virtual machines

VLAN-5

This network can have a netmask of between 30 and 24. Use a value below 30

VLAN-50

Enterprise link with rel 'enterprise' is mandatory

VLAN-51

The IP %s is in quarantine

VLAN-52

Invalid input. Repeated NIC attachment value is not allowed

VLAN-53

Cannot edit the name and gateway of the VLAN because it has IPs assigned to deployed virtual machines

VLAN-54

Unmanaged IP cannot be put in quarantine

VLAN-55

The network service type does not belong to the same datacenter as the VLAN

VLAN-56

The virtual network is not an external network

VLAN-57

Invalid input. Repeated IP href value is not allowed.

VLAN-58

The requested VLAN does not exist

VLAN-59

The IP supplied does not belong to an unmanaged network

VLAN-6

The network does not match the mask. Check your request

VLAN-60

When editing an UnmanagedIp, you may only change the attribute 'ip'

VLAN-67

Private VLAN tags are automatically allocated and cannot be changed

VLAN-68

The IP is not available

VLAN-7

Gateway address out of range. It must be in the IP address range

VLAN-8

The requested virtual network does not exist

VLAN-9

There must be at least one default VLAN in each virtual datacenter

VLAN_61

The requested IPs are not from an external network

VLAN_62

The requested IPs are not from an unmanaged network

VLAN_63

The requested IPs are not from a public network

VLAN_64

The requested IP is not from an external network

VLAN_65

The requested IP is not from an unmanaged network

VLAN_66

The requested IP is not from a public network

VM-0

The virtual machine does not have a hypervisor assigned

VM-02

Error reconfiguring virtual machine

VM-1

The requested virtual machine does not exist

VM-10

The virtual machine is in a state that does not allow the request, therefore it cannot be modified

VM-100

The requested IP is not available

VM-101

The network service type of the vlan does not match with the selected network service type in the hypervisor

VM-102

The selected remote ip is using an incompatible tag with the selected vlan network

VM-103

The selected remote ip is using a tag already used by an different vlan than the selected one

VM-104

Cannot assign that vlan tag to the selected vlan because it's out of rack range

VM-105

The selected rack cannot allow new vlan tags

VM-106

A virtual machine must be captured in order to be released

VM-107

A virtual machine must be deployed in order to be released

VM-108

Virtual machine cannot be reconfigured because of invalid new values

VM-109

You are trying to undeploy a virtual machine using a template that is not stored in the Apps Library. If you undeploy it, the virtual machine template cannot be recovered. To proceed with the undeploy, please call this functionality again with the 'forceUndeploy=true' option

VM-11

The virtual machine is not in any hypervisor. Therefore the change of state cannot be applied

VM-110

Virtual machine is using a template without a system disk file. It cannot be deployed.

VM-111

Virtual machine cannot be created from a virtual machine template without a disk file

VM-112

Cannot perform this action because cores per socket is not available for this hypervisor

VM-113

Virtual machine cannot be created from a virtual machine template not DONE, check its state and pending tasks.

VM-114

Virtual machine cannot modify ''hdInBytes'', use primary disk reconfigure.

VM-12

The allowed power states for virtual machine deployment are ON, OFF, PAUSED, UNKNOWN or ALLOCATED

VM-13

Virtual machine configuration actions can only be performed when the virtual machine is NOT-ALLOCATED or OFF

VM-14

Only the 'used' attribute of the virtual machine network configuration can be changed

VM-15

There should be at least one 'used' network configuration in each virtual machine

VM-16

The virtual machine template supplied is not available in the virtual appliance's datacenter

VM-17

The virtual machine template supplied cannot be used in the current enterprise

VM-18

The virtual machine template is not compatible and there is no compatible conversion

VM-19

The virtual machine template has a compatible conversion but it is not ready (in progress or failed)

VM-2

The virtual machine is already locked by another operation

VM-20

To perform this action, the virtual machine must be in NON_MANAGED state

VM-21

The virtual machine node does not exist

VM-23

Cannot restore the original virtual machine after a failed reconfigure; the original virtual machine info was not found

VM-24

The resource is already used by another virtual machine

VM-26

The allowed power state for resetting a virtual machine is ON

VM-27

The allowed power state for creating an instance of a virtual machine is OFF

VM-28

Cannot reconfigure a non-managed virtual machine template

VM-29

Cannot reconfigure the template of a virtual machine that is not managed by the platform

VM-3

The virtual machine is not deployed

VM-30

Cannot reconfigure a virtual machine (instance or persistent) to change its template to another master

VM-31

The persistent virtual machine template supplied for reconfigure is already attached to a virtual machine

VM-32

Cannot reconfigure the virtual machine template when the virtual machine is present in the hypervisor

VM-33

We do not currently allow imported virtual machines to be reconfigured

VM-34

Only 'cpu' and 'ram' can be reconfigured in imported virtual machines

VM-4

The virtual machine cannot change to the required state

VM-44

You are trying to undeploy an imported virtual machine. If you undeploy it, the virtual machine template cannot be recovered. To proceed with the undeploy, please call this functionality again with the 'forceUndeploy=true' option

VM-45

Some of the resources indicated are already used

VM-46

At least one IP address must be supplied when changing virtual machine NICs in deployed machine

VM-47

At least one hard disk must be supplied using a link when changing virtual machine hard disks

VM-48

Disk already attached to this virtual machine

VM-49

You have exceeded the number of NICs that can be added to a virtual machine

VM-5

The virtual machine cannot change state due to a communication problem

VM-50

You are not permitted to add two NICs with IPs in the same VLAN

VM-51

Cannot create a virtual machine because the persistent virtual machine template is not ready

VM-52

The current virtual machine is not assigned to a virtual appliance, so cannot obtain its representation using media-type application/vnd.abiquo.virtualmachinewithnode or application/vnd.abiquo.virtualmachinewithnodeextended

VM-53

ESXi only supports memory sizes that are a multiple of 4

VM-54

Virtual machine contains extra HardDisk and/or Volumes with the same sequence, try detaching some external storage.

VM-55

Cannot attach more than 4 disks to an IDE controller

VM-56

Invalid virtual machine description: missing primary disk, hardware profile or identifier.

VM-57

The hypervisor where the virtual machine is deployed is not running properly. Contact your System Administrator

VM-58

There are no IP addresses available in the default network for use by a virtual machine.

VM-59

Virtual machine cannot be reconfigured due to unexpected errors. Contact your System Administrator

VM-6

The virtual machine does not support the action PAUSE

VM-60

Cannot change the layer of a virtual machine that has been assigned to a hypervisor

VM-61

The disk link/s supplied are missing the type attribute or it is invalid

VM-62

Invalid input. Repeated disk attachment value is not allowed.

VM-63

Invalid input. Repeated disk href value is not allowed.

VM-64

Cannot create an instance of a virtual machine that is not managed by the platform. Please capture the virtual machine then try again

VM-65

The name of the node is required

VM-66

Cannot deploy the virtual machine because target physical NIC cannot be found. The physical NIC where the virtual NIC with IP was attached may have been removed directly in the hypervisor

VM-67

Virtual machine link not found

VM-68

Malformed virtual machine link

VM-69

Current target hypervisor does not have the required physical NICs to allocate the requested IPs

VM-7

The allowed state for deploying virtual machines is NOT_ALLOCATED

VM-70

The primary disk of the virtual machine cannot be modified

VM-71

At least one primary disk must be defined.

VM-72

Primary disk of virtual machine should be unique.

VM-73

VRDP passwords should be up to 8 characters

VM-74

Invalid character in password. VRDP password characters should be in range a..zA..Z0..9

VM-75

The Virtual Machine has two NICs using IPs in the same VLAN

VM-76

Cannot update the resources in target physical machine and datastore

VM-77

To capture a virtual machine, the virtualmachine link from the infrastructure context is required

VM-78

Malformed virtual machine link from infrastructure to capture

VM-79

The virtual datacenter is not compatible with the hypervisor from you are capturing the virtual machine

VM-8

The allowed states for deleting virtual machines are UNKNOWN and NOT_ALLOCATED

VM-80

Disk sequences cannot be repeated

VM-81

The disk at sequence 0 is captured by default, so it is not necessary to define it

VM-82

The disk sequence does not match the data retrieved from the hypervisor

VM-83

The disk size does not match the data retrieved from the hypervisor

VM-84

The size and the sequence are required properties of the disk

VM-85

There are some disks on the remote virtual machine that cannot be captured

VM-86

Every NIC defined requires a VLAN link

VM-87

Malformed VLAN link

VM-88

The VLAN link contains an invalid virtual datacenter

VM-89

The VLAN link contains an invalid enterprise

VM-9

The requested virtual machine template does not exist

VM-90

The VLAN link contains an invalid datacenter

VM-91

IP sequence cannot be repeated

VM-92

The selected IP is already attached to another virtual machine

VM-93

Malformed IP address

VM-94

The IP from the remote virtual machine does not match the NIC defined by the user in the same sequence

VM-95

The IP from the remote virtual machine does not match the NIC defined by user with the same MAC address

VM-96

The MAC address, the IP address and the sequence are required properties of the NIC

VM-97

There are some NICs on the remote machine that cannot be captured

VM-98

The public IP was not purchased for this virtual datacenter

VM-99

The requested IP is in quarantine

VOL-0

Could not create the volume in the selected tier

VOL-1

There are not enough resources in the selected tier to create the volume

VOL-10

The size of the volume cannot be reduced

VOL-11

The 'name' field of the volume cannot exceed 256 characters in length

VOL-13

The size property must be a non-zero integer up to 9223372036854775807

VOL-14

The volume cannot be edited because it is being used in a virtual machine

VOL-15

An unexpected error occurred and the volume could not be updated

VOL-17

Cannot resize a generic iSCSI volume

VOL-18

Could not get the storage manager remote service

VOL-19

Could not add the initiator mappings

VOL-2

The name of the volume is required

VOL-20

The requested initiator mapping does not exist

VOL-21

The volume is not attached to the virtual machine

VOL-22

Invalid link to the volume to attach

VOL-23

Invalid virtual datacenter in the link to the volume to attach

VOL-24

The volume is already attached to a virtual machine

VOL-25

The maximum number of attached disks and volumes has been reached

VOL-26

An unexpected error occurred while attaching the volume. Please contact the Administrator

VOL-27

The volume is already detached

VOL-28

An unexpected error occurred while detaching the volume. Please contact the Administrator

VOL-29

An unexpected error occurred while reconfiguring storage

VOL-3

The volume does not exist

VOL-39

The volume can only be moved to another virtual datacenter in the same datacenter

VOL-4

An unexpected error occurred while creating the volume

VOL-40

There are not enough resources in the selected pool to create the volume

VOL-41

The volume can only be moved to another virtual datacenter in the same enterprise

VOL-42

The persistent volume cannot be moved because it is being used in a virtual machine

VOL-43

The pool must be ISCSI when creating Generic ISCSI volumes

VOL-44

There is already a volume with that internal name

VOL-45

The internal name of the volume is required

VOL-5

The volume cannot be deleted because it is associated with a virtual machine

VOL-6

Could not physically delete the volume from the target storage device

VOL-7

The volume cannot be deleted because it is being used in a persistent template process

VOL-8

The persistent volume cannot be deleted because it is being used in a virtual appliance

VOL-9

The connection field of the volume is required

VSM-0

An error occurred when monitoring the physical machine

VSM-1

An error occurred when shutting down the monitored physical machine

VSM-2

An error occurred when subscribing the virtual machine

VSM-3

An error occurred when unsubscribing the virtual machine

VSM-4

An error occurred when refreshing the virtual machine state

VSM-5

An error occurred when resetting the last known state of the virtual machine

VSM-6

An error occurred when checking and refreshing the virtual machine state

VSM-7

VSM service unavailable; check the URL of the service.

WKF-01

Request to workflow endpoint failed

WKF-02

Cancellation of a workflow task failed

WKF-03

Continuation of a workflow task failed