Abiquo 5.0

Skip to end of metadata
Go to start of metadata

3.8.x


 Click here to show/hide properties changes in 3.8.x


Property_______________________________Description

3.8.0






Disabled




abiquo.api.max.sessionsThis property has been temporarily disabled and will be enabled in future releases



Added




abiquo.esxi.datastoreVmFile

The datastore to hold the VM definition file when deploying VMs with only volumes attached. If there are standard disks, use the datastore of one of these disks, otherwise use the property. The default value is defined by 'abiquo.esxi.datastoreRdm'.

 

  

abiquo.monitoring.enabled

Enable/disable monitoring, alarms and alerts
Default: false

  

abiquo.neutron.external-net

Name of the gateway network in Neutron where routers will be connected. This network is the one that connects the Neutron internal networks to the world.
Default: abq-external

 

  

abiquo.neutron.region

The region that configures the Neutron endpoint in the Keystone installation. By default Abiquo will use the value of the 'abiquo.datacenter.id' property.

 

  

abiquo.neutron.reserved-ips

Number of IP addresses that are reserved for Neutron in each network. For each network, Neutron needs at least: one address for the DHCP agent, one for the network gateway, one for the network router, and one for each load balancer. This has to be taken into account when planning the number of IPs reserved for Neutron, as it will determine the total number of load balancers that users will be able to create in each network.
Default: 20

 

  

abiquo.neutron.vlan-physical-net

Name of the physical network in Neutron where the VLANs created from Abiquo will be attached.
Default: abq-vlans

 

  

abiquo.vappspec.retrydelayms

Milliseconds to wait before retrying a virtual appliance spec materialization in the same virtual datacenter.
Default: 15000

   

abiquo.vappspecpool

Number of concurrent virtual appliance spec materialization operations at a given time (not in the same virtual datacenter).
Default: 3

   

abiquo.watchtower.host

Address where watchtower is located for monitoring use
Default: 127.0.0.1

  

abiquo.watchtower.port

Port where watchtower is listening for monitoring use
Default: 36638

  
Changed




abiquo.rabbitmq.username

RabbitMQ username
Default: abiquo

 

abiquo.rabbitmq.password

RabbitMQ password
Default: abiquo

 
abiquo.instance.targetDiskFormatType.hyperv_301

Disk format type for instances taken in virtual datacenters for each hypervisor plugin (HV). Set to empty with no value to avoid any additional conversion (use the instance operation result format).

There is no default value for Hyper-V so that the result format will be the same as the original template (VHD or VHDX)




Deleted




abiquo.kairosdb.hostAddress where KairosDb is located for VM monitoring



abiquo.kairosdb.portPort where KairosDb is listening for VM monitoring



3.8.1






No changes to properties in this version




3.8.2






Added




abiquo.nsx.edge.cluster-id

vCenter cluster where the Edge appliances will be deployed.

 

  

abiquo.nsx.edge.datastore-id

vCenter datastore where the Edge appliances will be deployed.

 

  

abiquo.nsx.edge.dvportgroup-id

vCenter distributed port where the uplink interfaces of the Edges will be attached.

 

  

abiquo.nsx.edge.public-network-cidr

Configure primary addresses of Edge uplink interfaces from this pool.

 

  

abiquo.nsx.load-balancer-reserved-ips

Number of IP addresses that are reserved for NSX in each private network to allocate to load balancers.
Default: 20

 

  

abiquo.nsx.transport-zone

The transport zone that logical switches will be connected to.

 

  
Changed




abiquo.esxi.metrics.{METRIC}
  • cpu
  • cpu-mz
  • cpu-time
  • memory
  • memory-swap
  • memory-swap2
  • memory-vmmemctl
  • memory-physical
  • memory-host
  • disk-latency
  • uptime

To prevent Abiquo from retrieving metrics, set the property to false for each ESXi metric (METRIC) you do not wish to retrieve. After you change these properties, restart the Monitor Manager (VSM) remote service for the properties to take effect.
Default: true
Range: true,false

In version 3.8 and 3.8.1, the name of these properties was "esx" instead of "esxi"



 

3.8.3






Added




abiquo.nsx.connection-timeout-ms

Timeout to establish connections to the NSX manager in milliseconds. A value of 0 means no timeout.
Default: 0

 

  

abiquo.nsx.read-timeout-ms

Timeout to complete connections to the NSX manager in milliseconds. A value of 0 means no timeout.
Default: 0

 

  

abiquo.nsx.use-edge-dhcp

Configure DHCP in Edge only for selected network types. The default is all network types (comma separated values).
Default: internal, external, public, unmanaged

 

  
Changed




abiquo.dvs.enabled

Enable DVS. Note that the vCenter login and password can be used when DVS is disabled
Default: true



 

3.8.4/5






Changed




abiquo.storage.forcesamecontrollertype

If true, the controller and controller type for all additional disks will be the same one defined for the first template disk.
Default: false



 

3.8.6






Changed




abiquo.auth.module

Whether Abiquo will authenticate against: database, database and LDAP/Active Directory, or OpenID
Default: abiquo
Range: abiquo, ldap, openid
Added openid type



 

abiquo.openid.authorization.endpoint

The OpenID Connect authorization endpoint. This endpoint must be accessible from the user's browser

   

abiquo.openid.client.id

The ID of the client that has been registered in the OpenID Connect server for the Abiquo platform.

   

abiquo.openid.client.name

The name of the client that has been registered in the OpenID Connect server for the Abiquo platform.

   

abiquo.openid.client.redirect-uris

Comma separated list of allowed redirect (callback) URIs used during the authentication flow. Must be: http://<api endpoint>/api/openid_connect_login

   

abiquo.openid.client.scopes

Comma separated list of scopes to request during authentication. Must have, at least: openid,profile,email.

   

abiquo.openid.client.secret

The secret of the client that has been registered in the OpenID Connect server for the Abiquo platform.

   

abiquo.openid.endsession.endpoint

(Optional) If configured, Abiquo will attempt to perform a global logout by performing a request to this endpoint. This is part of the Session Management optional spec. This endpoint must be accessible from the user's browser

   

abiquo.openid.enterprise-claim

The name of the claim returned by the authorization server that contains the names used to map the Abiquo enterprise where the user belongs.

   

abiquo.openid.enterprise-property

(Optional) If present, Abiquo will try to find an enterprise that has a property with the name configured in this Abiquo property, and use its value to match the "enterprise claim" when resolving the user's enterprise. If absent, Abiquo will just look for an enterprise with the name returned in the "enterprise claim".

   

abiquo.openid.issuer

The OpenID Connect authorization issuer.

   

abiquo.openid.role-claim

The name of the claim returned by the authorization server that contains the names used to map the user permissions to an Abiquo role.

   

abiquo.openid.target

The URL where the user will be redirected from the OpenID connect server upon successful authentication. Something like http://<abiquo ui host>/ui/#/dashboard

   

abiquo.openid.jwks.endpoint

The OpenID Connect JWKS endpoint. This endpoint must be accessible from the Abiquo server

   

abiquo.openid.token.endpoint

The OpenID Connect token endpoint. This endpoint must be accessible from the Abiquo server

   

abiquo.openid.userinfo.endpoint

The OpenID Connect user info endpoint. This endpoint must be accessible from the Abiquo server

   


3.10.x


 Click here to show/hide properties changes in 3.10.x
Property_______________________________Description

3.10.0






Added




abiquo.vsm.pollingfrequency.azurecompute-arm

The delay between VSM polling of virtual machines in milliseconds for each public cloud plugin (PC).
Default: 300000

 

  

abiquo.pcr.template.check.delay

Delay between executions of the public cloud provider templates check (milliseconds). Default is 12 hours
Default: 43200000

   
jclouds.azurecompute.arm.publishersjclouds property. See Microsoft Azure ARM Integration



Deleted




abiquo.vsm.pollingfrequency.hpcloud-compute

The delay between VSM polling of virtual machines in milliseconds for each public cloud plugin (PC).

 

  

abiquo.openstack.autoAllocateFloatingIps

If true, enable automatic Floating IP allocation. This property configures how public IP addresses are assigned to the virtual machines deployed in OpenStack clouds. If the virtual machines are not directly attached to a public network, enabling this property will automatically allocate a floating IP for the virtual machines. If virtual machines are deployed and attached directly to a public network, then this property should be set to false.

 

  

abiquo.openstack.autoGenerateKeyPairs

If true, enable automatic generation of key pairs. This will make sure that the owner of the virtual machines will have SSH access to the deployed virtual machines.

 

  

abiquo.server.sessionTimeout

Time the server waits before marking a client session as expired (minutes).

   

3.10.1






No changes to properties in this version




3.10.2






Added




abiquo.pluginmetadata.{HV}.baseDiskFormatType

  • vmx_04
  • kvm
  • hyperv_301
  • oracle_vm
  • xenserver

Override default plugin metadata to update the preferred format when requesting compatible conversions. This format should be included in the 'compatibleDiskFormatTypes' list. Allowed values: any DiskFormatType; For more information and default values. See Template Compatibility Table.
Default: VMDK_FLAT

   

abiquo.pluginmetadata.{HV}.compatibleDiskFormatTypes

  • vmx_04
  • kvm
  • hyperv_301
  • oracle_vm
  • xenserver

Override default plugin metadata to update the list of compatible formats. Allowed values: any DiskFormatType. List of comma separated values, should contain 'baseDiskFormatType'. See Template Compatibility Table.
Default: VMDK_FLAT,VMDK_SPARSE 

   

abiquo.pluginmetadata.{HV}.diskControllers

  • vmx_04
  • kvm
  • hyperv_301
  • oracle_vm
  • xenserver

Override default plugin metadata to update the compatible controller. Allowed values: any DiskControllerType. List of comma separated values; first is used as default. Possible values are SCSI, IDE, VIRTIO
Default: SCSI,IDE 

   

3.10.3






Added




com.abiquo.esxi.experimental.eagerzero.copyIf true, force eager zero thick provisioning on copied disks 
  
com.abiquo.esxi.experimental.eagerzero.newIf true, force eager zero thick provisioning on new empty disks 
  

3.10.4






Added










com.abiquo.esxi.disk.enableuuid

Present Disk UUID as SCSI serial number in the guest OS
Default: true

 

  
com.abiquo.esxi.experimental.customize.addnicRun hypervisor tools guest customization after adding a NIC. Deleted in 4.0.2



com.abiquo.esxi.experimental.customize.configureIf true, run hypervisor tools guest customization. Deleted in 4.0.2



com.abiquo.esxi.experimental.customize.ostypesRun hypervisor tools to customize the guest for the given operating system types. Deleted in 4.0.2



com.abiquo.esxi.experimental.customize.configure.periodms

Polling interval for checking if guest tools is up and running after power on. The default value is 10 seconds
Default: 10000




com.abiquo.esxi.experimental.customize.configure.timeoutms

Time to wait for guest tools to get up and running after power on. The default value is 15 minutes
Default: 90000




com.abiquo.esxi.experimental.customize.win.unattendfile

Optional path to custom unattend file on the Remote Services server. Abiquo will replace the variables $adminPassword and $hostName
Default: /opt/abiquo/config/my_unattend.xml




3.10.5






Added




abiquo.mail.charset

Character set to be used in email notifications
Default: UTF-8

   

3.10.6






Added




com.abiquo.esxi.experimental.customize.waitpassword.periodms

Prevent the user from logging in before the guest customizations have applied the password. Wait in milliseconds between checks for the password set by guest customizations
Default: 10000




com.abiquo.esxi.experimental.customize.waitpassword.timeoutms

Timeout in milliseconds for checks for the password set by guest customizations. The default value of 0 means that the timeout is not activated. To activate it set a value, such as 9000000 ms (15 minutes)

Default: 0




com.abiquo.esxi.experimental.avoidvmxswap

Whether the platform should avoid swap or not.
Default: false

 
  
com.abiquo.esxi.experimental.memory.allocation

Set virtual machine memory reservation.
Default: 0

 
  

3.10.7






Changed




abiquo.openid.client.scopes

Comma separated list of scopes to request during authentication. Must have, at least: openid,profile,email.
Abiquo 3.10.7 added support for phone

   







4.0.x


 Click here to show/hide properties changes in 4.0.x
Property_______________________________Description

4.0.0






Added




abiquo.amazon.public.subnet.mask

Mask to use when creating the public subnet in AWS to configure the nating
Default: 24

 

  

abiquo.backup.{BACKUP-PLUGIN}.config.path

    • avamar
    • veeam

This property indicates where the backup plugin configuration file is located for each backup plugin (BACKUP-PLUGIN}. This property is only required in the remote services that use the plugin: virtual-factory, cloud-provider-proxy
Default:

    • avamar = /opt/abiquo/config/avamar.properties
    • veeam = /opt/abiquo/config/veeam.properties
 

  

abiquo.vcd.reserved-ips

Number of IP addresses that are reserved for vCloudDirector in each private network to allocate to load balancers.
Default: 20

 

  

abiquo.virtualfactory.backup.openSession

Maximum number of simultaneous operations on a single backup manager
Default: 2

 

  

abiquo.virtualfactory.device.openSession

Maximum number of simultaneous operations on a single device
Default: 2

 

  

abiquo.vsm.vmsyncfrequency.vcd

The delay between virtual machine synchronizer operations in milliseconds. for each hypervisor or public cloud plugin (PLUGIN)
Default: 180000

 

  
Changed




abiquo.vcenter.port.connection

Port for connection to vCenter (only used in NSX)
Default: 443

 

  
Deprecated




abiquo.PROVIDERNAME.defaultprofiles


Used to create an allowlist for groups of hardware profiles, for example, abiquo.amazon.defaultprofiles=t1.micro,c4.small

Abiquo v4.0+ manages hardware profiles on the Hardware profiles tab in Infrastructure view, so Abiquo v4.0+ will ignore these properties.

During the upgrade process to v4.0, Abiquo will retrieve the profiles previously on the allowlist for the cloud provider from the Abiquo database and create them in Abiquo, and make them available to all enterprises with credentials for a public cloud provider.

When the Administrator synchronizes hardware profiles in Infrastructure view, ALL hardware profiles will be obtained from the cloud provider and created as active profiles in Abiquo. The administrator can then control the profiles available to each enterprise and recommended profiles for each virtual machine template

Note: This property was previously documented in the Abiquo 3.10 wiki in Control hardware profiles in public cloud.

 


  

4.0.1






Added




abiquo.virtualfactory.azurecompute-arm.maxconcurrentupdates

The maximum number of concurrent updates to a virtual machine in Azure ARM.
Default: 5

 

  
Deleted




abiquo.dvs.portgroup.maxsize

Number of available ports in each port group.

 

  

abiquo.dvs.vcenter.password

Password of the vCenter account

 

  

abiquo.dvs.vcenter.user

User of the vCenter user account

 

  

4.0.2






Added




abiquo.backup.check.delay

Delay between executions of the backup results check (milliseconds). Default is 10 minutes
Default: 600000
Default changed form 43,200,000 ms

   
abiquo.instance.targetDiskFormatType.esx

Disk format type for instances taken in virtual datacenters for each hypervisor plugin (HV). Set to empty with no value to avoid any additional conversion (use the instance operation result format).
Defaults: esx = vmdk_sparse




abiquo.m.instanceid

NOTE: You must set a unique value for each instance of the outbound API, which includes each member of the same cluster of M nodes or the platform will not run (minus)
Unique name for an M instance. All M instances must set this property to a unique name. The name must be unique even between the members of the same cluster of M nodes.

   

abiquo.rabbitmq.addresses

NOTE: Replaces the abiquo.rabbitmq.host and abiquo.rabbitmq.port. You MUST define this comma-separated list with the host:port value for each RabbitMQ server or the platform will not run (minus)
For your RabbitMQ server(s), an obligatory list of host:port values, separated by commas. Replaces the separate address and port properties that are now deprecated
Default: localhost:5672

 
abiquo.server.mail.authIf authentication is required to connect to the mail server
 Default: true
   
abiquo.server.mail.extra.(javax mail property)

For each SMTP property available in Java Mail (see the full reference here:
https://javaee.github.io/javamail/docs/api/com/sun/mail/smtp/package-summary.html) you can define an Abiquo propery to configure it by adding the 'abiquo.server.mail.extra.' prefix. For example, you could configure the 'mail.smtp.quitwait' by setting the following property: abiquo.server.mail.extra.mail.smtp.quitwait = false

   
abiquo.server.mail.portThe mail server port
 Default: 25
   
abiquo.server.mail.sslIf SSL should be used to connect to the mail server
 Default: false
   
abiquo.server.mail.tlsIf TLS should be used to connect to the mail server
Default: false
   

abiquo.virtualfactory.azurecompute-arm.maxconcurrentupdates

The maximum number of concurrent updates to a virtual machine in Azure ARM.
Default: 5

 

  

abiquo.vsm.actor.creation.delay.esx

The delay in milliseconds added between the creation of actors on VSM startup for each hypervisor or public cloud plugin (PLUGIN).
Default: 0




abiquo.vsm.hostsyncfrequency.{HV}

    • vmx_04
    • esx
    • kvm
    • hyperv_301
    • oracle_vm
    • xenserver
    • vcd

Time between executions of infrastructure check in milliseconds
Default: 300000

 

  

abiquo.vsm.pollingfrequency.packet

The delay between VSM polling of virtual machines in milliseconds for each public cloud plugin (PC).
Default: 300000

 

  

abiquo.vsm.pollingfrequency.esx

The delay between VSM polling of virtual machines in milliseconds for each hypervisor (HV).
Default: 300000

 

  

abiquo.vsm.vmsyncfrequency.esx

The delay between virtual machine synchronizer operations in milliseconds. for each hypervisor or public cloud plugin (PLUGIN)
Default: 180000

 

 
Changed




abiquo.auth.module

Whether Abiquo will authenticate via: database; database and LDAP/Active Directory; or OpenID.
Default: abiquo
Range: abiquo, ldap, openid
Added openid



 
Deleted




abiquo.rabbitmq.host

Address where RabbitMQ is located

 

abiquo.rabbitmq.port

RabbitMQ password

 
com.abiquo.esxi.experimental.customize.addnicRun hypervisor tools guest customization after adding a NIC



com.abiquo.esxi.experimental.customize.configureIf true, run hypervisor tools guest customization



com.abiquo.esxi.experimental.customize.ostypesRun hypervisor tools to customize the guest for the given operating system types



4.0.4






No changes to properties in version 4.0.4





4.2.x


 Click here to show/hide properties changes in 4.2.x
PropertyDescription

4.2.0






Added




abiquo.capturedhcp

Update DHCP during virtual machine capture
Default: false

   

abiquo.monitoring.max.statistic.period.days

Maximium period in days for statistical metrics queries through the API
Default: 7


  

abiquo.nsx.edge.datastore-policy

Allocation policy for selection of datastores to deploy Edge appliances.
Default: leastvms
Range: leastvms, mostspace

 

  

abiquo.rabbitmq.tls

Set to true if RabbitMQ server is SSL enabled
Default: false

 

abiquo.rabbitmq.tls.trustallcertificates

The platform will not enforce any server certificate authentication if set to true
Default: false

 

abiquo.vm.statsupdate.interval

Interval between executions of the virtual machine standardized stats updater in milliseconds
Default: 43200000

   

abiquo.vm.statsupdate.range.days

Number of days to consider in the statistic query executed by the virtual machine standardized stats updater
Default: 30

   

abiquo.watchtower.password

Watchtower password
Default: xabiquo

  

abiquo.watchtower.tls

Set to true if Watchtower server is SSL enabled
Default: false

  

abiquo.watchtower.tls.trustallcertificates

The platform will not enforce any server certificate authentication if true
Default: false

  

abiquo.watchtower.username

Watchtower username
Default: admin

  
Changed




abiquo.backup.check.delay

Delay between executions of the backup results check (milliseconds). Default is 10 minutes
Default: 600000
Change to default value

   

abiquo.nsx.edge.datastore-id

List of vCenter datastores where the Edge appliances will be deployed in CSV format with allocation according to abiquo.nsx.edge.datastore-policy
Changed to CSV list

 

  
Deprecated




com.abiquo.esxi.experimental.eagerzero.copy

If true, force eager zero thick provisioning on copied disks. Deprecated and replaced by Allocation attribute for VM templates and VM disks

 
  
com.abiquo.esxi.experimental.eagerzero.newIf true, force eager zero thick provisioning on new empty disks. Deprecated and replaced by Allocation attribute for VM templates and VM disks 
  
Deleted




abiquo.esxi.datastoreVmFile

The datastore to hold the VM definition file when deploying VMs with only volumes attached. If there are standard disks, use the datastore of one of these disks, otherwise use the property. The default value is defined by 'abiquo.esxi.datastoreRdm'.

 

  
abiquo.server.mail.authIf authentication is required to connect to the mail server
Default: true
   

4.2.1






Added




abiquo.cpp.cloudoorsphere.defaults.healthcheck.attempts

The load balancer health check attempts to return while syncing a load balancer
Default: 3


  

abiquo.cpp.cloudoorsphere.defaults.healthcheck.bodyregex

The load balancer health check body regex to return while syncing a load balancer


  

abiquo.cpp.cloudoorsphere.defaults.healthcheck.interval

The load balancer health check interval to return while syncing a load balancer
Default: 60000


  

abiquo.cpp.cloudoorsphere.defaults.healthcheck.path

The load balancer health check path to return while syncing a load balancer
Default: /


  

abiquo.cpp.cloudoorsphere.defaults.healthcheck.port

The load balancer health check port to return while syncing a load balancer
Default: 80


  

abiquo.cpp.cloudoorsphere.defaults.healthcheck.protocol

The load balancer health check protocol to return while syncing a load balancer
Default: http


  

abiquo.cpp.cloudoorsphere.defaults.healthcheck.statusregex

The load balancer health check status regex to return while syncing a load balancer
Default: 200


  

abiquo.cpp.cloudoorsphere.defaults.healthcheck.timeout

The load balancer health check timeout to return while syncing a load balancer
Default: 20000


  

abiquo.cpp.cloudoorsphere.defaults.loadbalancer.algorithm

The load balancer algorithm to return while syncing a load balancer
Default: round-robin


  

abiquo.cpp.cloudoorsphere.defaults.loadbalancer.instancetype

The instance type (hardware profile) to use when creating a load balancer
Default: t2.nano


  

abiquo.cpp.cloudoorsphere.loadbalancer.allowed.algorithms


The list of algorithms supported by the load balancers (comma-separated values)
Default: round-robin


  

abiquo.cpp.cloudoorsphere.loadbalancer.creation.timeout


Timeout to use while creating a load balancer and waiting for a finished status
Default: 600000


  

abiquo.cpp.cloudoorsphere.loadbalancer.deletion.timeout


Timeout to use while deleting a load balancer and waiting for a finished status because the API does not return this status
Default: 600000


  

abiquo.nsx.edge.description

Edge description. See Configure the NSX integration
Default: Managed by Abiquo
This property is obligatory in Abiquo 4.2.1+. You can add this property for the entire platform, or for each enterprise as "nsx.edge.description". You must add this property or the platform will not function (minus)


 

  

abiquo.nsx.edge.dhcp.size

Specify the size of the DHCP Edge appliance (ecmp plugin). See Configure the NSX integration
Default: compact
Range: compact, large, quadlarge, xlarge
This property is obligatory in Abiquo 4.2.1+. You can add this property for the entire platform, or for each enterprise as nsx.edge.dhcp.size. You must add this property or the platform will not function (minus)


 

  

abiquo.nsx.edge.esg.size

Specify the size of the ESG Edge appliance (gateway and ecmp plugin). See Configure the NSX integration
Default: compact
Range: compact, large, quadlarge, xlarge
This property is obligatory in Abiquo 4.2.1+. You can add this property for the entire platform, or for each enterprise as nsx.edge.esg.size. You must add this property or the platform will not function (minus)


 

  

abiquo.nsx.edge.plr-esg-id

ID of the Edge that acts as the PLR (nsx-nat only)


 

  

abiquo.nsx.edge.plr-transit-cidr

CIDR of the transit network to be used between the PLR and the Edges of each Abiquo VDC (nsx-nat only)


 

  

abiquo.nsx.edge.plr-transit-ip

Configure the IP to be used to connect the PLR to the plr-transit vSwitch (nsx-nat only). Optional, if not set, use the lowest address in "abiquo.nsx.edge.plr-transit-cidr"


 

  

abiquo.virtualfactory.cloudoorsphere.vmstate.retry.timeoutInMilliseconds

The timeout to get the state of a VM after a power action
Default: 1800000


  
cloudoorsphere.non-retryableA list of API calls that must not be retried after an error code in the response (comma-separated values)
Default: server:create



abiquo.vcd.connectionTimeoutMs

Time to wait to establish the connection to vCloud Director (milliseconds)
Default: 10000

 

  

abiquo.vcd.login.TimeoutMs

Maximum time to wait for login to vCloud Director (milliseconds)
Default: 60000

 

  

abiquo.vcd.readTimeoutMs

Maximum time to wait to read from the connection to vCloud Director (milliseconds)
Default: 30000

 

  

4.2.1






Added




abiquo.nsx.nat.protocols

 Allowed NAT rule protocols (nsx-nat only)
Default: TCP,UDP,ANY,ICMP#ANY,ICMP#Parameter-Problem,ICMP#Echo-Request,ICMP#Destination-Unreachable,ICMP#Redirect,ICMP#Router-Solicitation,ICMP#Time-Exceeded,ICMP#Address-Mask-Request,ICMP#Timestamp-Reply,ICMP#Router-Advertisement,ICMP#Timestamp-Request,ICMP#Address-Mask-Reply,ICMP#Echo-Reply,ICMP#Source-Quench


 

  
Changed




abiquo.nsx.edge.public-network-cidr

Network range where the "public" load balancer IPs will be taken from. It must be a range dedicated to Abiquo.
Deleted from NAT plugin, still used in gateway plugin
 

  

4.2.3






Added




abiquo.guest.password.length


Template to configure guest initial passwords that enables you to define the length and the character set. The following tokens are allowed in the template:

  • lower= –configures the number of lower case characters to generate
  • upper= –configures the number of upper case characters to generate
  • numbers= –configures the number of numbers to generate
  • symbols= –configures the number of special characters to generate.
  • global= –configures the number of total characters to generate.

For each token, the value must be in one of the following formats:

  • N –generate this exact number of characters
  • N-M –generate between N and M characters
  • N- –generate at least N characters.
  • -M –generate at most M characters

Examples:

  1. Password with at least 2 lower case and upper case letters, between 2 and 4 special characters, and a total length of 10 characters: 
    abiquo.guest.password.length = lower=2-,upper=2-,numbers=0,symbols=2-4,global=10
  2. Password with at least 5 characters, regardless of the content: abiquo.guest.password.length = global=5-

Default: lower=2-6,upper=2-6,numbers=2-6,symbols=2-6

 

  

abiquo.guest.password.exclude

Characters to avoid when generating guest passwords, for example: ,;$




abiquo.vcd.metric.live.force

Do not try to retrieve historical metrics data for vCloud Director, only use live metrics
Default: false

 

  

abiquo.vcd.metric.live.fallback

If it is not possible to retrieve historical metrics data for vCloud Director, attempt to use live metrics
Default: true

 

  

abiquo.vcd.parentnetwork

Private network connection to allow outgoing traffic in vCloud Director. Value can be "none" for isolated networks or any existing organization network name. The default value of "edge-uplink" will use the external network connected to the edge gateway of the organization virtual datacenter.
Default: edge-uplink

 

  

abiquo.virtualfactory.hyperv.automaticShutdownAction

Action to take for the VM when the host is shut down. Sets Msvm_VirtualSystemSettingData.AutomaticShutdownActionhttps://msdn.microsoft.com/en-us/Library/hh850257(v=vs.85).aspxwhen creating a VM. When it is set to "3", the state will be saved and swap files will be written; set their location with the swapFileDataRoot property.
Default: 3
Range: 2, 3, 4

 

  

abiquo.virtualfactory.hyperv.refreshMonitorJob.intervalms

Refresh interval in milliseconds for checking progress on operations that require monitoring of a job, such as disk copies.
Default: 1000

 

  

abiquo.virtualfactory.hyperv.sambaHosts

List of Samba hosts where the platform can discover shares to use as Hyper-V datastores. The list is in CSV format. Leave empty to not try discovery

 

  

abiquo.virtualfactory.hyperv.swapFileDataRoot

The path of a directory where swap files for the VM will be stored. When the automaticShutdownAction property is set to save the VM state, swap files will be written to this location.
Default: C:\ProgramData\Microsoft\Windows\Hyper-V

 

  


4.4.x


 Click here to show/hide properties changes in 4.4.x
PropertyDescription

4.4.0






Added




abiquo.amazon.waitforstatus.timeout

Default AWS wait for status timeout
Default: 1200000

 

  
abiquo.dnsmasq.serviceiface
Network interface onto which bridged VLAN interfaces will be attached 

  

abiquo.dnsmasq.basedir

Folder in which to store lease information 

  

abiquo.dnsmasq.startscript

Script to start a new instance of dnsmasq on a bridged VLAN interface 

  

abiquo.dnsmasq.stopscript

Script to stop and clean up an instance of dnsmasq running on a bridged VLAN interface 

  

abiquo.dnsmasq.reloadscript

Script to reload a running instance of dnsmasq

 

  
abiquo.oraclease.read-timeout-ms


Timeout to complete connections to the Oracle ASE manager (milliseconds). A value of 0 means no timeout
Default: 0


  

abiquo.oraclease.connection-timeout-ms

Timeout to establish connections to the ORACLE ASE manager in milliseconds. A value of 0 means no timeout.
Default: 0


 

  

abiquo.oraclease.timeout

Timeout to get the state of a virtual machine
Default: 600


 

  

abiquo.oraclease.defaultLoginUser

ORACLE ASE default user for connecting to Linux VMs over SSH. For Windows VMs, edit the template and enter the Administrator username and password
Default: opc


 

  

abiquo.virtualfactory.azurecompute-arm.operationtimeout


The timeout to consider an operation failed in Azure ARM
Default: 46000000

 

  

abiquo.vsm.vmsyncforcedpublishcount.{PLUGIN}

    • vmx_04
    • esx
    • kvm
    • hyperv_301
    • oracle_vm
    • xenserver
    • amazon
    • vcd
    • azurecompute-arm
    • oracle-ase-emea
    • oracle-ase-us

Number of virtual machine synchronizer executions before force the publish of virtual machine definitions. The default value of 0 means never

Default: 0

 

  
Deleted




abiquo.virtualfactory. azure. defaultLoginPassword


Default password for virtual machines in Azure if not found in the template
Default: abqazure0!5

 

  

abiquo.virtualfactory. azure.defaultLoginUser

Default login for virtual machines in Azure if not found in the template.
Default: abiquo

 

  

abiquo.virtualfactory.azure.retry.timeBetweenTriesInSeconds

Time to wait between polls during a retry
Default: 30

 

  

abiquo.virtualfactory.azure.retry.timeoutInSeconds

Timeout retrying an operation
Default: 900

 

  

abiquo.virtualfactory.azure.storageAccountPrefix

Prefix of the name of the Azure Storage account created for deployments (one account per region).
Default: abiquostorage

 

  

abiquo.virtualfactory.azure.wait.timeBetweenTriesInSeconds

Time to wait between polls during an operation wait.
Default: 30

 

  

abiquo.virtualfactory.azure.wait.timeoutInSeconds

Timeout waiting for an operation to complete, e.g deploy / undeploy.
Default: 900

 

  
Changed




abiquo.vsm.actor.creation.delay.{PLUGIN}
    • vmx_04
    • esx
    • kvm
    • hyperv_301
    • oracle_vm
    • xenserver
    • amazon

The delay in milliseconds added between the creation of actors on VSM startup for each hypervisor or public cloud plugin (PLUGIN).
Default: 0
Deleted azure

 

  

abiquo.vsm.hostsyncfrequency.{HV}

    • vmx_04
    • esx
    • kvm
    • hyperv_301
    • oracle_vm
    • xenserver
    • vcd
    • oracle-ase-emea
    • orace-ase-us

Time between executions of infrastructure check in milliseconds
Default: 300000
Added oracle-ase-emea and oracle-ase-us

 

  

abiquo.vsm.pollingfrequency.{PC}

    • amazon
    • azurecompute-arm
    • digitalocean2
    • elastichosts-ams-e
    • elastichosts-hkg-e
    • elastichosts-lax-p
    • elastichosts-lon-b
    • elastichosts-lon-p
    • elastichosts-sat-p
    • elastichosts-sjc-c
    • cloudsigma2-lvs
    • cloudsigma2-zrh
    • cloudsigma2-hnl
    • cloudsigma2-sjc
    • cloudsigma2-wdc
    • google-compute-engine
    • openstack-nova
    • oracle-ase-emea
    • oracle-ase-us
    • packet
    • rackspace-cloudservers-us
    • rackspace-cloudservers-uk
    • softlayer

The delay between VSM polling of virtual machines in milliseconds for each public cloud plugin (PC).
Default: 300000
Delete azure and added oracle-ase-emea and oracle-ase-us

 

  

abiquo.vsm.vmsyncfrequency.{PLUGIN}

    • vmx_04
    • esx
    • kvm
    • hyperv_301
    • oracle_vm
    • xenserver
    • amazon
    • vcd
    • oracle-ase-emea
    • oracle-ase-us
    • azurecompute-arm

The delay between virtual machine synchronizer operations in milliseconds. for each hypervisor or public cloud plugin (PLUGIN)
Default: 180000
Deleted azure and added oracle-ase-emea, oracle-ase-us, and azurecompute-arm

 

  


4.5.x


 Click here to show/hide properties changes in 4.5.x
PropertyDescription

4.5.0






Added




abiquo.openid.client.acr-validation


Validate acr values from jwt token when authenticating with an OpenID Connect Server, if true
Default: true

 


  

abiquo.openid.client.acr-values


Space separated values to send as acr values to an OpenID Connect Server when authenticating and to validate from jwt token if 'acr-validation' property is true
Default: 

 


  
abiquo.openid.cookie.maxage

After OpenID authentication flow, the API redirect adds a cookie with the access_token and the id_token. The expiry of the OpenID authentication cookie in seconds. A negative value means that the cookie is not stored persistently and will be deleted when the web browser exits. A zero value causes the cookie to be deleted
Default: 30




abiquo.openid.cookie.refreshtoken.includeIf true, the OpenID authentication cookie will also contain the refresh token.
Default: false




abiquo.pluginmetadata.{HP}.ethernetDrivers


Override default plugin metadata to update the compatible ethernet driver
Default: E1000, VMXNET3, PCNET32, VIRTIO

 


  
abiquo.server.mail.from

The sender of platform email notifications
Default: abiquo.server.mail.user




abiquo.virtualfactory.azurecompute-arm.defaultloginname


The default login name if not specified by the imported ARM template or by editing the template in the platform
Default: abiquo

 

  

abiquo.virtualfactory.azurecompute-arm.defaultloginpassword


The default login password if not specified by editing the template in the platform
Default: Password123456!

 

  

abiquo.virtualfactory.{HP}.openSession

  • oracle_vm
  • amazon
  • kvm
  • vmx_04
  • rackspace-cloudservers-uk
  • softlayer
  • esx
  • vcenter_cluster
  • openstack-nova
  • packet
  • hyperv_301
  • oracle-ase-emea
  • azurecompute-arm
  • oracle-ase-us
  • vcd
  • xenserver
  • digitalocean2
  • google-compute-engine
  • rackspace-cloudservers-us
  • cloudoorsphere

The maximum number of simultaneous operations on a single hypervisor or provider region.
Default: abiquo.virtualfactory.openSession


 

  

abiquo.virtualfactory.{DEV}.device.openSession

  • openstack-neutron
  • dnsmasq
  • omapi
  • nsx-ecmp
  • logical
  • nsx-nat
  • nsx-gateway

The maximum number of simultaneous operations on a single device
Default: abiquo.virtualfactory.device.openSession

 

  

abiquo.virtualfactory.{BM}.backup.openSession

  • veeam95
  • veeam80
  • avamar

The maximum number of simultaneous operations on a single backup manager, by type
Default: abiquo.virtualfactory.backup.openSession

 

  

abiquo.virtualfactory.openSession.byvdc


If true, the maximum number of simultaneous operations applies to a single virtual datacenter (instead of single hypervisor)
Default: false

 

  

abiquo.virtualfactory.{HP}.openSession.byvdc

  • oracle_vm
  • amazon
  • kvm
  • vmx_04
  • rackspace-cloudservers-uk
  • softlayer
  • esx
  • vcenter_cluster
  • openstack-nova
  • packet
  • hyperv_301
  • oracle-ase-emea
  • azurecompute-arm
  • oracle-ase-us
  • vcd
  • xenserver
  • digitalocean2
  • google-compute-engine
  • rackspace-cloudservers-us
  • cloudoorsphere

If true, the max number of simultaneous operations applies to a single virtualdatacenter (instead of single hypervisor), by type.
Default: abiquo.virtualfactory.openSession.byvdc



  

abiquo.virtualfactory.device.openSession.byvdc


If true, the default maximum number of simultaneous operations applies to a single virtualdatacenter (instead of a single device)
Default: false

 

  

abiquo.virtualfactory.{DEV}.device.openSession.byvdc

  • openstack-neutron
  • dnsmasq
  • omapi
  • nsx-ecmp
  • logical
  • nsx-nat
  • nsx-gateway

If true, the default maximum number of simultaneous operations applies to a single virtualdatacenter (instead of a single device), by type
Default: abiquo.virtualfactory.device.openSession.byvdc

 

  

abiquo.virtualfactory.backup.openSession.byvdc


If true, the default maximum number of simultaneous operations applies to a single virtualdatacenter (instead of a single backup manager)
Default: false

 

  

abiquo.virtualfactory.{BM}.backup.openSession.byvdc

  • veeam95
  • veeam80
  • avamar

If true, the default maximum number of simultaneous operations applies to a single virtualdatacenter (instead of a single backup manager), by type
Default: abiquo.virtualfactory.backup.openSession.byvdc

 

  
abiquo.inactivitysession.maxinhours

Maximum hours without activity in a pool before release. The minimum value is 6 and if a lower value is specified, the platform will use 6
Default: 24




abiquo.virtualfactory.openSession.faststatechanges


If true, VM state changes (powerOn, powerOff, shutdown, reset, pause, resume) are executed outside the pool (not waiting for any operation)
Default: false

 

  

abiquo.virtualfactory.{HP}.openSession.faststatechanges

  • oracle_vm
  • amazon
  • kvm
  • vmx_04
  • rackspace-cloudservers-uk
  • softlayer
  • esx
  • vcenter_cluster
  • openstack-nova
  • packet
  • hyperv_301
  • oracle-ase-emea
  • azurecompute-arm
  • oracle-ase-us
  • vcd
  • xenserver
  • digitalocean2
  • google-compute-engine
  • rackspace-cloudservers-us
  • cloudoorsphere

If true, VM state changes (powerOn, powerOff, shutdown, reset, pause, resume) are executed outside the pool (not waiting for any operation), by type.
Default: abiquo.virtualfactory.openSession.faststatechanges




com.abiquo.esxi.experimental.vmgroup.gueststartswith.{OSprefix} Add newly deployed VMs to an existing VM group (naming convention is Lic_{clustername}_{osname}_VMs) using DRS rules when the template osType matches the OSprefix of a property. For example, to add Windows VMs to Lic_vcloudcluster_Windows_VMs, you could use "win" as the value of OSprefix,



Deleted




abiquo.heartbeat.autostart

Automatically start Abiquo heartbeat
Default: true

 




Changed




abiquo.virtualfactory.openSession


The default maximum number of simultaneous operations on a single hypervisor
Default: 2

Description changed from "maximum" to "The default maximum" due to the introduction of more specific properties

 

  

abiquo.virtualfactory.backup.openSession


The default maximum number of simultaneous operations on a single backup manager
Default: 2

Description changed from "maximum" to "The default maximum" due to the introduction of more specific properties

 

  

abiquo.virtualfactory.device.openSession


The default maximum number of simultaneous operations on a single device
Default: 2

Description changed from "maximum" to "The default maximum" due to the introduction of more specific properties

 

  

4.6.x


 Click here to show/hide properties changes in 4.6.x
PropertyDescription

4.6.0






Added




abiquo.enterprise.property.discount.suffix

Pricing discount is defined in the enterprise properties. The property key is built using the hypervisor type in lowercase and adding a suffix, which is defined by this property
Default: _discount

 


  

abiquo.enterprise.property.pricefactor.suffix

Pricing pricefactor is defined in the enterprise properties. The property key is built using the hypervisor type in lowercase and adding a suffix, which is defined by this property
Default=_price_factor

 


  

abiquo.nars.async.amqp.backoff.minseconds

AMQP consumer reconnection.  First attempt to restart in seconds
Default: 2

   

abiquo.nars.async.amqp.backoff.maxseconds

AMQP consumer reconnection.  Maximum number of seconds without restart attempt
Default: 2

   

abiquo.nars.async.pool.max

Default maximum number of simultaneous operations on a single hypervisor or region connection.
Default: 2

   

abiquo.nars.async.pool.byvdc

If true, the max number of simultaneous operations apply to a single virtualdatacenter (instead of single hypervisor or region connection)
Default: false

   

abiquo.nars.async.pool.inactivity.maxhours

Maximum hours without activity in a pool before release. Minimum value is 6, if a lower value is specified, will use 6
Default: 24

   

abiquo.nars.async.pool.{plugin}.max

  • oracle_vm

  • amazon

  • kvm

  • vmx_04

  • rackspace-cloudservers-uk

  • softlayer

  • esx

  • vcenter_cluster

  • openstack-nova

  • packet

  • hyperv_301

  • oracle-ase-emea

  • azurecompute-arm

  • oracle-ase-us

  • vcd

  • xenserver

  • digitalocean2

  • google-compute-engine

  • rackspace-cloudservers-us

  • cloudoorsphere

  • openstack-neutron

  • nsx-gateway

  • nsx-nat

  • logical

  • nsx-ecmp

  • omapi

  • dnsmasq

  • avamar

  • veeam80

  • veeam95


Maximum number of simultaneous operations on a single hypervisor or region connection, by type.
Default: abiquo.nars.async.pool.max

   

abiquo.nars.async.pool.{plugin}.byvdc

  • oracle_vm

  • amazon

  • kvm

  • vmx_04

  • rackspace-cloudservers-uk

  • softlayer

  • esx

  • vcenter_cluster

  • openstack-nova

  • packet

  • hyperv_301

  • oracle-ase-emea

  • azurecompute-arm

  • oracle-ase-us

  • vcd

  • xenserver

  • digitalocean2

  • google-compute-engine

  • rackspace-cloudservers-us

  • cloudoorsphere

  • openstack-neutron

  • nsx-gateway

  • nsx-nat

  • logical

  • nsx-ecmp

  • omapi

  • dnsmasq

  • avamar

  • veeam80

  • veeam95


If true, the max number of simultaneous operations apply on a single virtual datacenter (instead of single hypervisor or region connection), by type.

Default: abiquo.nars.async.pool.byvdc

   

abiquo.nars.async.prefetch

Limit of parallelism of async request execution. Number of unacknowledged messages from the requests queue.
Default: 4

   

abiquo.plugin-client.connectionrequesttimeout

API to NARS http client configuration: timeout in milliseconds used when requesting a connection. A value of 0 is interpreted as an infinite timeout. A negative value is interpreted as undefined
Default: -1

   

abiquo.plugin-client.connectiontimeout

API to NARS client configuration: timeout in milliseconds when a connection is established. A value of 0 is interpreted as an infinite timeout. A negative value is interpreted as undefined
Default: -1

   

abiquo.plugin-client.pool.checkconnections

API to NARS http client pool configuration: When reusing a connection checks if the elapsed time since the last use exceeds this timeout.
Default: 5000

   

abiquo.plugin-client.pool.maxclients

API to NARS http client pool configuration: Max active HTTP connections to any NARS.
Default: 50

   

abiquo.plugin-client.pool.maxclientsperendpoint

API to NARS http client pool configuration: Max active HTTP connections to the same NARS instance.
Default: 10

   

abiquo.plugin-client.pool.maxkeepalivesms

API to NARS http client pool configuration: Max time to keep a persistent connection.
Default: 120000

   

abiquo.plugin-client.timeout


API to NARS http client configuration: milliseconds to wait for a sync execution in the plugin. 
Implemented as socket timeout (SO_TIMEOUT) in milliseconds, which is the timeout for waiting for data or, put differently, a maximum period inactivity between two consecutive data packets). A value of 0 is interpreted as an infinite timeout. A negative value is interpreted as undefined
Default: -1

   

abiquo.plugin-client.timeout.{plugintype}


API to NARS http client configuration: milliseconds to wait for a sync execution in the plugin by type

   

abiquo.plugin-client.timeout.{plugintype}.{operationname}


API to NARS http client configuration: milliseconds to wait for a sync execution in the plugin by type and operation

   

abiquo.pricing.import.check.delayInHrs

Delay between executions of the pricing import check in hours
Default: 24



 
Deleted




abiquo.nodecollector.timeout

Timeout for Server/API connections to Nodecollector (Discovery manager) in milliseconds.
Default: 180000



  
Changed




abiquo.cloudoorspherecloudoorspherecpp


For all CloudoorSphere properties, see CloudoorSphere

Property name changed from abiquo.cpp.cloudoorspherecpp




4.6.1






Added




com.abiquo.esxi.discovery.networkinterface.networks

Only use physical network interfaces connected to the specified networks when adding vCenter hosts or clusters. If ''onlymanagementip'' is true, then first check for IPs (management or not) in the specified networks and if none are found, use onlymanagementip filter. The filter is a comma separated list of network in CIDR format, and the order specifies the priority

 

  

com.abiquo.esxi.discovery.networkinterface.onlymanagementip

Only use virtual NICs of the host configured for management traffic<br/> Default: false

 

  

4.6.2






No changes to properties in 4.6.2




4.6.3






Added




abiquo.costusage.task.frequencyinhours

Frequency for executing the consolidation of usage accounted
Default: 24
Range: > 0

 

  

abiquo.nars.async.pendingpublish.minutes

Check for pending responses which failed to publish due to AMQP failure in nars
Default: 10

 

  

abiquo.nars.async.pendingpublish.path

Path to file that stores pending responses which failed to publish due to AMQP failure in nars
Default: /opt/abiquo/amqp-messages/nars.pending

 

  

abiquo.virtualfactory.pendingpublish.minutes

Check for pending responses which failed to publish due to AMQP failure in virtualfactory
Default: 10

 

  

abiquo.virtualfactory.pendingpublish.path

Path to file that stores pending responses which failed to publish due to AMQP failure in virtualfactory
Default: /opt/abiquo/amqp-messages/virtualfactory.pending

 

  

4.6.4






No changes to properties in 4.6.4




4.6.5






No changes to properties in 4.6.5






4.6.6






No changes to properties in 4.6.6






4.6.7






abiquo.experimental.shareddisks.bypass

Bypass restriction on multiple VMs using the same disk. Ignore additional VMs using the same disk during capture. After deleting or releasing the first VM, to assign a disk to another VM, you must force the VM to synchronize with the hypervisor

Default: false





4.7.x


 Click here to show/hide the properties changes in 4.7.x

4.7.0






Added




com.abiquo.esxi.webmks

If true, enable console access to VMs on vCenter using WebMKS. This will automatically allow remote access to all vCenter VMs. If the VMs have VNC extradata, then use VNC; otherwise use WebMKS.

Default: false



com.abiquo.esxi.webmks.force

If true, force the use of WebMKS when it is enabled for console access to VMs in vCenter. The force action takes place during the next VM reconfigure, when the platform will check for VNC extradata and remove it. This will ensure that remote access will be via WebMKS

Default: false



abiquo.availabilityzones.check.delayInHrs

Delay between checks of availability zones
Default: 24




abiquo.nsx.firewall.applicationprotocolsFirewall protocols that are allowed to use services applications (aka ALG (Application Level Gateway)). Collections separated using # delimiter
Default: FTP#SMB#ORACLE_TNS#MS_RPC_TCP#SUN_RPC_TCP




Deprecated




abiquo.m.accessToken

OAuth access token that M should use to perform requests to the Abiquo Server (API).

   

abiquo.m.accessTokenSecretOAuth secret access token that M should use to perform requests to the Abiquo Server (API).   

abiquo.m.consumerKey

OAuth consumer key that M should use to perform requests to the Abiquo Server (API). If these tokens are set, M will use OAuth authentication. Otherwise Basic Authentication will be used.

   

abiquo.m.consumerSecret

OAuth consumer secret that M should use to perform requests to the Abiquo Server (API).

   

abiquo.m.credential

Credentials that M should use to perform requests to the Abiquo Server (API).
Default: xabiquo

   

abiquo.m.identity

Identity that M should use to perform requests to the Abiquo Server (API).
Default: admin

   

4.7.1






Added




abiquo.nsx.static-edge-gateway

If false, when modifying the gateway of a network only update edge interface address if the new gateway is not in use in any lease of the DHCP

Default: true




abiquo.saml.attributes.user.email.claim

Indicates which SAML Response attribute must be read in order to find the user's email
Default: EmailAddress




abiquo.saml.attributes.user.firstname.claim

Indicates which SAML Response attribute must be read in order to find the user's name
Default: FirstName




abiquo.saml.attributes.user.lastname.claim

Indicates which SAML Response attribute must be read in order to find the user's last name
Default: LastName




abiquo.saml.binding

The URN of the binding profile to allow




abiquo.saml.cookie.maxage

Expiry time of cookie with access tokens after successful login in seconds
Default: 30




abiquo.saml.cookie.name

The name of the cookie created after a successful login
Default: ABQSAMLTOKENS




abiquo.saml.keys.encryption.alias

The alias of the encryption key stored in the keystore




abiquo.saml.keys.encryption.password

The password of the encryption key stored in the keystore




abiquo.saml.keys.keystore.password

Password to unlock the keystore file




abiquo.saml.keys.keystore.path

Path to the Java keystore containing the keys and certificates to encrypt and sign




abiquo.saml.keys.metadata.sign

Indicates if the SAML Requests must be signed
Default: false




abiquo.saml.keys.signing.alias

The alias of the signing key stored in the keystore




abiquo.saml.keys.signing.password

The password of the signing key stored in the keystore




abiquo.saml.metadata.generator.bindingSSO

Bindings to activate if the SP metadata must be generated by the API
Default: POST,Artifact




abiquo.saml.metadata.identityprovider.path

The path of the IDP metadata to load




abiquo.saml.metadata.mode

Indicates if the SP metadata is provided or must be generated by the API.
Default: generated
Range: generated, provided




abiquo.saml.metadata.serviceprovider.path

The path of the SP metadata to load if it is provided




abiquo.saml.mode

Indicates which SAML integration mode is desired: - single: only one SAML IDP Server is allowed to be configured; - multiple: allows abiquo basic auth and one SAML IDP Server
Default: single




abiquo.saml.redirect.endpoint

URI where the platform should redirect a successful Abiquo login using SAML SSO. Something like: https://<your.env>/ui




abiquo.saml.redirect.error.endpoint

URI where the platform should redirect an unsuccessful Abiquo login using SAML SSO.
Default: /error.html




abiquo.vcd.fenceVappWhen true, the vCloud virtual appliance network is NATROUTED: Retain IP/MAC across deployments. When false, the vCloud virtual appliance network is BRIDGED
Default: true



Changed




abiquo.auth.module

Whether Abiquo will authenticate via: database; database and LDAP/Active Directory; OpenID; or SAML.
Default: abiquo
Range: abiquo, ldap, openid, saml




Deleted




abiquo.m.accessToken

OAuth access token that M should use to perform requests to the Abiquo Server (API).

   

abiquo.m.accessTokenSecretOAuth secret access token that M should use to perform requests to the Abiquo Server (API).   

abiquo.m.consumerKey

OAuth consumer key that M should use to perform requests to the Abiquo Server (API). If these tokens are set, M will use OAuth authentication. Otherwise Basic Authentication will be used.

   

abiquo.m.consumerSecret

OAuth consumer secret that M should use to perform requests to the Abiquo Server (API).

   

abiquo.m.credential

Credentials that M should use to perform requests to the Abiquo Server (API).
Default: xabiquo

   

abiquo.m.identity

Identity that M should use to perform requests to the Abiquo Server (API).
Default: admin

   

4.7.2






No changes to properties in this version




5.0.x


 Click here to expand...

5.0.0







Added





abiquo.actionplan.webhook.client.connectionrequesttimeoutms

Action plan send web hook HTTP client, timeout in milliseconds used when requesting a connection from the connection manager. Zero is not allowed.
Default: 1000





abiquo.actionplan.webhook.client.connecttimeoutms

Action plan send web hook HTTP client, timeout in milliseconds until a connection is established. Zero is not allowed.
Default: 1000





abiquo.actionplan.webhook.client.maxclientsperroute

Action plan send web hook HTTP client, maximum clients per route.
Default: 10





abiquo.actionplan.webhook.client.maxkeepalivems

Action plan send web hook HTTP client, maximum total clients in pool.
Default: 120000





abiquo.actionplan.webhook.client.maxtotalclients

Action plan send web hook HTTP client, maximum total clients in pool.
Default: 50





abiquo.actionplan.webhook.client.redirects.enabled

Action plan send web hook HTTP client, follow redirect on hook response.
Default: false





abiquo.actionplan.webhook.client.sockettimeoutms

Action plan send web hook HTTP client, timeout in milliseconds for waiting for data or, put differently, a maximum period inactivity between two consecutive data packets). Zero is not allowed.
Default: 1000





abiquo.actionplan.webhook.client.ttlms

Action plan send web hook HTTP client, TTL in the pool in milliseconds.
Default: 5000





abiquo.amazon.waitforaccount.minutes

Default AWS wait for account creation
Default: 5





abiquo.auth.basic.restricted

If the true, the API only will allow the use of Basic Authentication on the login resource. The next API calls must use Token Authentication using as token the value of the header X-Abiquo-Token in login response.
Default: false





abiquo.azure.account.creation.appname

Name of the application registered during the account creation process on Azure.
Default: abiquo





abiquo.azure.account.creation.appredirecturi

Redirect URI for the application registered during the account creation process on Azure.
Default: https://abiquo.com





abiquo.vcd.firewall.vappnetwork

If true, create vCloud firewall at vCloud vApp network level
Default: false





5.0.1







Added





com.abiquo.esxi.webmks.proxypath

When ''com.abiquo.esxi.webmks'' is enabled, this property defines the path to a websocket proxy to avoid direct connection to ESX hosts. You can configure a different value for each datacenter on its Remote Services server. The default of no value means the UI will attempt to connect directly to ESX hosts.





abiquo.vcd.org.userRoleName

The name of the role for users created in vCloud Director. The role should be ''Organization Administrator'' or another role with equivalent privileges. The default value of "default" will use the role of the creator user.
Default: default





Deprecated in Abiquo 4.7.2





abiquo.nars.async.pool.avamar.maxAvamar deprecation

 

abiquo.nars.async.pool.avamar.byvdcAvamar deprecation




abiquo.virtualfactory.avamar.backup.openSessionAvamar deprecation




abiquo.virtualfactory.avamar.backup.openSession.byvdcAvamar deprecation




abiquo.backup.avamar.config.pathAvamar deprecation