Abiquo Documentation Cookies Policy

Our Documentation website uses cookies to improve your experience. Please visit our Cookie Policy page for more information about cookies and how we use them.


Abiquo 2.6


Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

API Documentation

For the Abiquo API documentation of this feature, see Abiquo API Resources and the page for this resource StorageResources.

External Storage in Abiquo

There are two main types of iSCSI external storage available to virtual machines in Abiquo: Managed Storage and Generic iSCSI Storage.

  • Managed Storage devices are fully managed by Abiquo allowing users access to Storage as a Service.
  • Generic iSCSI can be accessed by Abiquo as a set of manually entered pre-created volumes. Abiquo cannot communicate with the management interface of generic iSCSI devices to detect or manage the storage.

For further information, see Abiquo Virtual Storage

Troubleshooting External Storage on VMware

If a volume has been removed or replaced in the storage device, Abiquo may try to attach a volume that does not exist or is completely different to one previously configured. This situation may occur with: managed storage volumes, generic iSCSI volumes and persistent virtual machines. It can be resolved by manually performing a full HBA rescan of all ESX or ESXi hosts that had raw device mappings for the devices involved. In general, Abiquo avoids performing a full HBA rescan of storage on ESX or ESXi for performance reasons. Instead it checks for a raw device mapping for a given IQN and LUN, which means that changes to volumes can lead to this situation.

The Storage Tab

To manage a datacenter's external storage, go to the Infrastructure View by clicking the button at the top of the main screen, select the datacenter in the list, and click the button to view the Datacenter detail. Click the Storage tab to manage the external storage infrastructure.

Managed Storage

Abiquo can manage the following storage device types:

  • LVM
  • Nexenta
  • NetApp

For other iSCSI storage devices, you can develop your own storage plugin using Abiquo's Storage Plugin SDK or access them without management as Generic iSCSI Storage.

Adding, Editing and Deleting Managed Storage Devices

The first step in working with managed storage is to create a Storage Device. A storage device provides access to the storage technology so you can configure the Management and Service networks that the cloud nodes will use to access it. You can manage storage devices with the buttons located in the lower left corner of the storage screen, beneath the storage devices list.

Button

Action

Add a storage device.

Remove a storage device.

Edit the selected storage device.

Click the button, select Storage Device, and complete this form:

Field

Value

Name

The name of the storage pool

Storage technology

The target storage technology - choose from the supported managed storage types

Management IP

The IP used by the Abiquo platform to connect to the storage technology for management purposes

Management Port

The port used by the Abiquo platform to connect to the storage technology for management purposes

Service IP

The IP used by the cloud nodes to connect to the storage technology

Service Port

The port used by the cloud nodes to connect to the storage technology

User

For NetApp devices only: the user for connecting to the storage technology

Password

For NetApp devices only: the password for connecting to the storage technology

Add NetApp Credentials When Creating the Storage Device

You must add the NetApp credentials when creating or editing a storage device. You cannot add the NetApp credentials in the abiquo.properties file.

After you have created a storage device, you can check its details by selecting it in the list of storage devices.

 

Generic iSCSI Storage

Abiquo offers support for generic iSCSI storage without storage management capacity.

Creating a Generic iSCSI Storage Device

Click  and complete the form to create a storage device, selecting GENERIC_iSCSI storage technology:

Field

Value

Name

The name of the storage device

Storage technology

Select GENERIC_iSCSI

Management IP

The IP used by the Abiquo platform to connect to the storage

Management Port

The port used by the Abiquo platform to connect to the storage

iSCSI IP

The IP used by the cloud nodes to connect to the storage

iSCSI Port

The port used by the cloud nodes to connect to the storage

Adding and deleting volumes is described in the Managing Generic iSCSI Volumes section below.

Storage Pools

Button

Action

Add storage pools.

Remove storage pools.

Update storage pool information.

Edit the selected storage pool.

Managed Storage Pools

After you create a managed storage device, you can add storage pools. Abiquo automatically detects all the pools in the target storage and allows you to add them to the platform. After the managed storage pools have been added, users will be able to create volumes. The volumes will be automatically allocated to storage pools in the chosen tier, in accordance with the selected storage pool allocation method.

Generic iSCSI Storage Pools

Abiquo creates a single pool for an entire generic iSCSI storage device because it cannot communicate with the device's management interface to detect the pools already created on the storage. For generic iSCSI storage, volumes must be created outside Abiquo in the storage device and then manually entered into Abiquo in the Virtual Datacenters view. For more information please see Manage Virtual Storage.

Adding Storage Pools

Storage Pools can be added directly after creating the managed storage device or later.

To add Storage Pools to your infrastructure, click the , and select the option "storage pool" from the drop-down list.

Select the storage device from the popup.

The Add Storage Pool popup will open and you will see the list of available storage pools. Those already selected are disabled, which means that they are already added to your Infrastructure and it is not possible to add them again.

Each Managed Storage Pool must be associated with a tier, according to its service level. When users create a volume and select a Tier (Service level) for the volume, it will be created in a pool belonging to that tier in accordance with the storage pool allocation method.

After you create the storage pool, you can check its details by selecting it in the list of devices.

Modifying a Storage Pool

To modify a Storage Pool, select it and click the button to open the Edit form. You cannot modify the name of the Storage Pool because it is already defined. You can change the tier of both managed storage and generic iSCSI storage.

Removing a Storage Pool

To remove a storage pool, first remove all of the volumes within it. Then select the pool in the list and click the button to remove it.

Managing Storage Service Levels with Tiers

The Tiers tab allows you to configure different service levels for external managed storage. Storage service levels are set with tiers that are configured to enable end users to choose the service level they want for the volumes they create under Storage as a Service. Click on the triangle beside a tier to view its contents listed in the format "pool (storage device)".

The Tiers tab contains the default tiers in Abiquo. You cannot add or remove Tiers, but you can change the tier name and enable/disable the required tiers. Select a Tier and click the button to edit it.

FieldDescription
NameName of the storage tier
DescriptionA brief description of the storage tier
Storage Allocation PolicyAllocation method for assigning external storage volumes to pools. See Storage Pool Allocation. Overrides the abiquo.storagemanager.storageMethod property set for the whole Abiquo platform in Abiquo Configuration Properties
Restrict access to this tierThe tier will be restricted for any enterprise that is created while this box is checked. When editing enterprises, you can allow or prohibit tiers for the datacenter. You can change the configuration on the Enterprise Access tab or by editing the Enterprise (under an Allowed Datacenter on the Tiers tab).
EnableEnable or disable this tier. Disabled tiers are displayed in light gray in the datacenter Tiers tab. You cannot disable a tier if it contains volumes. Disabled tiers cannot be used.

Restrict Enterprise Access to Tiers

After an enterprise has created volumes in a tier, you cannot restrict access to the tier for that enterprise.

Disabling Tiers

You cannot disable a Tier if it contains volumes.

Multiple Pools in Tiers

Abiquo uses all pools assigned to a tier. When you create a volume, Abiquo will automatically allocate it to a pool in the chosen tier in accordance with the Storage Pool Allocation.

Controlling Access to a Storage Service Level for all Enterprises

When you click on the Enteprise Access tab, you will see a list of all the enterprises with access to the storage tier. Click the buttons to "Allow for all enterprises" or "Restrict for all enterprises". This setting will override the checkbox on the previous page for all existing enterprises. However, newly created enterprises will receive the option specified with the checkbox.

The Allow for all enterprises or Restrict for all enterprises setting can later be changed for individual enterprises. See Controlling Access to Storage Tiers in the Manage Enterprises documentation

The Volume List

The Volume list contains all the volumes created in the pool with detailed information such as the internal volume ID or IQN used to identify the volume in the target storage technology, the volume size, etc.

  • In managed storage, volumes are created by users under Storage as a Service in Virtual Datacenters view. For more information see Manage Virtual Storage
  • In generic iSCSI storage, volumes must be created outside Abiquo in the storage device itself and manually added by an administrator in the Infrastructure view. For more information see Managing Generic iSCSI Storage Volumes.

The details panel of each volume contains a table of the Initiator mappings. Each storage technology will have its own access policies for each volume, so the different clients (hypervisors) may access the volume using different IQNs or LUN numbers. The Initiator mapping table shows, for each Initiator IQN (representing a single client), the IQN and LUN number that will be used to connect to the volume.

Managing Generic iSCSI Volumes

Volumes that have been already created on generic iSCSI storage can be added and deleted from Abiquo. They cannot be modified within Abiquo because there is no communication with the management interface of the generic iSCSI storage device.

Adding a Generic iSCSI Volume

To add a pre-existing generic iSCSI volume, open your datacenter and generic iSCSI storage device. Then click the button below the Volume list and complete the form. Note that many storage systems will automatically generate a LUN of 0 by default.

Field

Value

Virtual Datacenter

The name of the virtual datacenter

Name

The volume name

Description

A description of the volume

Total size

In GB or MB

Target IQN

The IQN of the volume

LUN

The LUN of the volume

 

  • No labels