GUI Create VLANs for External Networks

Field	Value
Name	The name of the external or unmanaged VLAN. The name can contain up to 128 characters
IPv6	Mark this checkbox to create an IPv6 network. See Create External IPv6 Networks
Net. Address	The network address of the VLAN as created by the Network Administrator
Netmask (CIDR)	The network mask with an integer value between 16 and 30 inclusive
Gateway	The gateway of the network. Make sure the gateway is an IP address inside the range defined by the network address and the network mask
Tag*	Enter the tag supplied by the Network Administrator and check its availability
Check	The Check button will check tag availability for all the racks of the Abiquo datacenter. Green: tag available Yellow: tag in use by other networks, but you can still use it. E.g. external or public network Red: tag not available because it is not assigned in Abiquo for use on the rack.
Network service type	Choose the Network Service Type, which represents a Network Interface on the hypervisors. Configure Network Service Types when you configure physical machines.
Unmanaged	Mark this checkbox if you will manage IP addresses outside Abiquo
Enterprise**	Required field. You must click browse and choose an enterprise that the external or unmanaged VLAN will be assigned to.
Device	Optional: to manage IP addresses with a network virtualization system, select the Abiquo device that defines this system. You must have pre-created this external network directly in this virtualization system. The IP addresses of this network will be managed by the selected network virtualization system and may be assigned using its DHCP service. You may need to ensure that virtual machines deployed on this network allow traffic to the appropriate ports for a DHCP connection.
Primary DNS	Primary DNS
Secondary DNS	Secondary DNS
DNS suffix	The default DNS suffix
Restricted	Mark this checkbox to restrict this network so that when editing VMs, only users with the privileges to Attach NICs in restricted networks and Detach NICs from restricted networks can work with IPs in these networks
Static Routes	Click "Manage" to add and modify static routes for external networks only. See Configure static routes for external networks