Abiquo Documentation Cookies Policy

Our Documentation website uses cookies to improve your experience. Please visit our Cookie Policy page for more information about cookies and how we use them.

Abiquo 5.0

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 10 Next »

This section describes how to configure the limits and resource access of an enterprise in a location, which means a specific datacenter or public cloud region. 

To create enterprise configuration for a cloud location:

  1. Go to Users → edit Enterprise
  2. Go to Datacenters → select an Allowed datacenter or public cloud region
    • If your platform configuration enables you to select a provider, you can also create some default settings at the provider level
  3. Edit the datacenter or public cloud region

Configure resource limits in a location

At the location level, you can limit resources and set defaults.

To configure the same limits for all regions in a provider, select a provider group. For example, if you enter a hard limit of 8 CPUs, then the platform will create a hard limit of 8 CPUs in each region for this provider.

To limit resources in a datacenter or public cloud region, set allocation limits:

  1. Select an Allowed Datacenter (datacenter or public cloud region) in the right pane 
  2. Click the pencil Edit button. An edit dialog will open at the Allocation limits tab
  3. Set valid allocation limits

This is process is very similar to that of setting enterprise limits, so for more details, see #Control Enterprise Resources above.

Unable to render {include} The included page could not be found.

Set the default virtual network for an enterprise in a datacenter

Each time the tenant's users create a virtual datacenter, Abiquo creates a private network and assigns a default network to the virtual datacenter based on the default networks set for the virtual datacenter (default or custom), enterprise (default) or platform (see Configuration View#Network). If a user deploys a VM without creating a NIC, Abiquo will assign a NIC on the default network.

The default network for an enterprise in a datacenter can be the default private network (" An auto-created private VLAN " called " default_private_network "), a custom private netowrk, an external network, or an unmanaged network.  See  Cloud Tenant Networks  for more information about these network types.

Before you begin optionally define the default private network in  Configuration View . And  if you wish to use an external or unmanaged network, define it in Infrastructure view in the datacenter's  Manage External Networks

To set the default network for an enterprise in a datacenter:

  1. Go to Users view and create or edit an enterprise. Select the Datacenters tab and edit an Allowed datacenter 
  2. Select the Default VLAN tab. The current default VLAN network will be highlighted in bold text
  3. Select a different private or external VLAN
  4. Click Accept to save the Enterprise datacenter resources

     Click here to show/hide the screenshot

When you change the default network for the enterprise and datacenter, the new default network will be assigned to all new virtual datacenters you create. But remember it is possible to override the enterprise's datacenter default network for a specific virtual datacenter by going to Edit Virtual datacenter → Networks.

Control access to storage tiers in a datacenter

You can control access to storage tiers that define different storage service levels. Before you begin, configure storage in Infrastructure view (see Manage Storage). 

To set the allowed and restricted storage tiers for an enterprise, go to Enterprise → Datacenters → Tiers. To allow tiers, select one or more tiers from the prohibited column and drag 

  • The configuration you perform here will override the basic tier configuration set in Infrastructure view (Allow tier for all enterprises or on the Enterprise access tab). But a new configuration on the Enterprise access tab will 

  • You cannot restrict access to the tier for an enterprise that has created volumes in the tier

Continue with further configuration or click Accept to save the Enterprise.

 Click here to show/hide the screenshot

Control access to datastore service levels in a datacenter

You can control access to datastore service levels with datastore tiers. Before you begin,  configure datastore service levels with tiers for the datacenter and  add your hypervisor datastores to datastore tiers. See Manage Datastore Service Levels with Datastore Tiers 

To allow or prohibit access to a datastore tier for an individual enterprise, go to Enterprise → Allowed datacenters → Datastore tiers. Drag and drop datastore tiers to the Allowed or Prohibited lists for this enterprise

  • You cannot restrict the access of enterprises that have already created disks in the tier
  • Changes in Infrastructure view to the Datastore tiers on the Enterprise access tab will override these settings

Click Accept to save the Enterprise datacenter resources


 Click here to show/hide the screenshot


Allow tenants to use backup policies in a datacenter

Backup policies enable users to select partially or fully pre-configured backups for their virtual machines. To create backup policies see Backup policies. For information about how users work with them on virtual machines, see VM backups

The enterprise that creates backup policies will automatically be able to use them. For all other enterprises, select the backup policies to allow for each datacenter.

To allow tenants to use backup policies:

  1. Open Users view and edit the tenant's Abiquo enterprise
  2. On the Allowed datacenters tab, edit the datacenter
  3. On the Backup policies tab, select the backup policies for the tenant
    • Remember that the users will require backup privileges to enable and configure backups

Allow tenants to use hardware profiles

Hardware profiles can enable users to easily select appropriate hardware combinations for their virtual machines. Before you begin, you can create hardware profiles for the datacenter in Infrastructure view on the Hardware profiles tab.

To use hardware profiles:

  1. Select the checkbox to enable hardware profile mode for the tenant
  2. Select the hardware profiles that the enterprise will be allowed to use (available hardware profiles)
  • If a tenant enterprise has no hardware profiles available, then the tenant's users will not be able to deploy VMs
  • If a tenant enterprise already has VMs deployed when you enable hardware profiles, Abiquo will try to assign existing hardware profiles. If an existing profile is inactive, Abiquo will activate this profile and assign it. Otherwise, Abiquo will create a new hardware profile named ABQ_HP_{cpu}_{ram}_ID

After you enable hardware profiles for a tenant, you can do the following steps in the Apps library:

  • Edit their VM templates to ensure that there are valid hardware profiles for each template (within template CPU and RAM limits)
  • Recommend hardware profiles for each template. Abiquo will display "(recommended)" after these profile names when users create a VM from a template
    • Enable users to only work with recommended hardware profiles: Abiquo will only display recommended hardware profiles

Abiquo will now require users to select hardware profiles when they create VMs.

Disable hardware profile mode

You can disable hardware profiles mode if the provider also supports CPU and RAM. When you disable it for an enterprise in a datacenter, the hardware profile details will simply “disappear” from VMs, and users will work with CPU and RAM values again. When editing the enterprise, however, the profiles that you made available are still marked, in case you decide to enable hardware profiles again.

If you enable hardware profile mode again, Abiquo enables hardware profiles like the first time you enabled hardware profiles. After re-enabling hardware profile mode, you should check templates and recommended hardware profiles.

Disable specific hardware profiles

To restrict enterprise access to a specific hardware profile, i f the enterprise does not have any deployed VMs using it, you can edit the enterprise’s allowed datacenter and unselect the hardware profile in the available list.

You can also make Abiquo hardware profiles inactive in Infrastructure view, at any time and even if they are used in deployed VMs. See Hardware profiles#Stop users from working with a hardware profile

Configure enterprise resources with the API

API Documentation

For the Abiquo API documentation of this feature, see Abiquo API Resources and the page for this resource EnterpriseLimitsByDatacentersResource.

  • No labels