Abiquo Documentation Cookies Policy

Our Documentation website uses cookies to improve your experience. Please visit our Cookie Policy page for more information about cookies and how we use them.


Abiquo 5.0

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 19 Next »


This section describes how to configure the limits and resource access of an enterprise in a location, which means a specific datacenter or public cloud region. 

To create enterprise configuration for a cloud location:

  1. Go to Users → edit Enterprise
  2. Go to Datacenters → select an Allowed datacenter or public cloud region
    • If your platform configuration enables you to select a provider, you can also create some default settings at the provider level
  3. Edit the datacenter or public cloud region



Set resource limits for a tenant in a datacenter or provider or region

Unable to render {include} The included page could not be found.




Set the default virtual network for an enterprise in a datacenter

Unable to render {include} The included page could not be found.




Allow tenants to use storage tiers in a datacenter

Unable to render {include} The included page could not be found.



Allow tenants to use datastore service levels in a datacenter

Unable to render {include} The included page could not be found.


 

Allow tenants to use backup policies in a datacenter

Backup policies enable users to select partially or fully pre-configured backups for their VMs. 

To allow a tenant to use backup policies:

  1. Go to Users → edit Enterprise → Datacenters → edit Allowed datacenter → Backup policies
  2. Select the Backup policies to allow for the tenant



Troubleshooting

  • The enterprise that creates backup policies will automatically be able to use them. For all other enterprises, select the backup policies to allow for each datacenter.
  • Users will require backup privileges to enable and configure backups


Related links:

  • To configure backup systems and create backup policies see Backup
  • For information about how users will work with backup policies on VMs, see VM backups



Allow tenants to use hardware profiles

Hardware profiles can enable users to easily select appropriate hardware combinations for their virtual machines. Before you begin, you can create hardware profiles for the datacenter in Infrastructure view on the Hardware profiles tab.

To use hardware profiles:

  1. Select the checkbox to Enable hardware profiles mode for the tenant
  2. Select the Hardware profiles that the enterprise will be allowed to use (available hardware profiles)
  • If a tenant enterprise does not have any hardware profiles available, then the tenant's users will not be able to deploy VMs
  • If a tenant enterprise already has VMs deployed when you enable hardware profiles, Abiquo will try to assign existing hardware profiles. If an existing profile is inactive, Abiquo will activate this profile and assign it. Otherwise, Abiquo will create a new hardware profile named ABQ_HP_{cpu}_{ram}_ID

After you enable hardware profiles for a tenant, you can do the following steps in the Apps library:

  • Edit the tenant's VM templates to ensure that there are valid hardware profiles for each template (within template CPU and RAM limits)
  • Recommend hardware profiles for each template. Abiquo will display "(recommended)" after these profile names when users create a VM from a template
    • Enable users to only work with recommended hardware profiles: Abiquo will only display recommended hardware profiles

Abiquo will now require users to select hardware profiles when they create VMs.

Disable hardware profile mode

You can disable hardware profiles mode if the provider also supports CPU and RAM. When you disable it for an enterprise in a datacenter, the hardware profile details will simply “disappear” from VMs, and users will work with CPU and RAM values again. When editing the enterprise, however, the profiles that you made available are still marked, in case you decide to enable hardware profiles again.

If you enable hardware profile mode again, Abiquo enables hardware profiles in the same way as when you first enabled hardware profiles. After re-enabling hardware profile mode, you should check templates and recommended hardware profiles.

Disable specific hardware profiles

To restrict enterprise access to a specific hardware profile, i f the enterprise does not have any deployed VMs using it, you can edit the enterprise’s allowed datacenter and unselect the hardware profile in the available list.

You can also make Abiquo hardware profiles inactive in Infrastructure view, at any time and even if they are used in deployed VMs. See Hardware profiles#Stop users from working with a hardware profile




Configure enterprise resources with the API

API Documentation

For the Abiquo API documentation of this feature, see Abiquo API Resources and the page for this resource EnterpriseLimitsByDatacentersResource.

  • No labels